EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC-ND 4.0

Comparative Study of Optimally Designed Hybrid Steel‐Timber Coupled Shear Wall Systems

Kazuma Hayashida, Cristiano Loss, Yuji Miyazu

ce/papers · 2026-09 · 9 (2-3) · 1159-1164

DOI: 10.1002/cepa.70647 ↗

Kurz gefasst

Fachartikel in der Zeitschrift ce/papers, online erschienen am 14.09.2026. Verfasst von Kazuma Hayashida und 2 weiteren Autor:innen. Die Arbeit nennt 11 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-ND 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Hybrid timber‐based structural systems are increasingly adopted in high‐seismic regions, where cross‐laminated timber (CLT) coupled wall (CW) systems provide efficient lateral resistance. This study compares optimally designed CLT–CW systems employing conventional steel link beams (SLBs) and diagonally arranged buckling‐restrained braces (BRBs) as coupling devices. A combinatorial multiobjective optimisation using a simulated annealing algorithm was performed, in which the capacities of SLBs, BRBs and base hold‐down dampers (HDDs) were treated as discrete design variables. A two‐dimensional nonlinear dynamic analysis was conducted for an 18‐story case study building subjected to multiple earthquake ground motions. The optimised BRB system exhibited lower shear demand in CLT wall panels than the SLB system due to diagonal force interaction, and required lower HDD capacity owing to the vertical force component provided by the BRBs. Based on the optimised BRB configuration, BRBs in the upper stories were partially replaced with self‐centering friction dampers (SCFDs) without further optimisation. This modification reduced residual inter‐story drift ratio, demonstrating that targeted changes limited to the upper stories can effectively improve global post‐earthquake deformation performance.

Zitieren

APA

Hayashida, K., Loss, C., & Miyazu, Y. (2026). Comparative Study of Optimally Designed Hybrid Steel‐Timber Coupled Shear Wall Systems. ce/papers, 9(2-3), 1159-1164. https://doi.org/10.1002/cepa.70647

Vancouver

Hayashida K, Loss C, Miyazu Y. Comparative Study of Optimally Designed Hybrid Steel‐Timber Coupled Shear Wall Systems. ce/papers. 2026;9(2-3):1159-1164. doi:10.1002/cepa.70647

BibTeX
@article{Hayashida2026,
  author = {Hayashida, Kazuma and Loss, Cristiano and Miyazu, Yuji},
  title = {Comparative Study of Optimally Designed Hybrid Steel‐Timber Coupled Shear Wall Systems},
  journal = {ce/papers},
  year = {2026},
  volume = {9},
  number = {2-3},
  pages = {1159--1164},
  doi = {10.1002/cepa.70647}
}
Kostenlos starten →