EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Local buckling performance of thin‐walled steel flexural members under axial and rotational restraint at elevated temperatures

Ravikant Singh, Daniel McCrum, Avik Samanta

ce/papers · 2026-09 · 9 (2-3) · 2330-2335

DOI: 10.1002/cepa.70622 ↗

Kurz gefasst

Fachartikel in der Zeitschrift ce/papers, online erschienen am 14.09.2026. Verfasst von Ravikant Singh und 2 weiteren Autor:innen. Die Arbeit nennt 29 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The present novel investigation quantifies how axial (K a ) and rotational (K r ) restraints influence the strength and critical temperature of cold‐formed steel (CFS) flexural members, failing in local dominant buckling. The section geometries are selected using finite‐strip analysis to ensure local buckling governs the failure. In total, 324 analyses are performed having restraint levels ranged from 0‐4 kN/mm for K a and 0‐500 kNm/rad for K r . At ambient temperature, both K a and K r end restraints found to increase flexural capacity. Increasing K r from 0 to 500 kNm/rad found to increase the capacity by 45.4%, 39.5%, and 31.5% for the three geometries, whereas increasing K a from 0 to 4 kN/mm yields smaller improvements of 12.3‐15.2%. When exposed to fire, the critical temperature changes marginally. For shallow sections, additional rotational restraint provides a small initial increment to the failure temperature, followed by a drop. For the deep section, higher K r found to lower the failure temperature. The effect of the K a on the critical temperature was found to be less than K r . The critical temperature improvements are largest at low axial restraint and level off at higher restraint, where thermal bowing and early local yielding/buckling found to offset the benefits.

Zitieren

APA

Singh, R., McCrum, D., & Samanta, A. (2026). Local buckling performance of thin‐walled steel flexural members under axial and rotational restraint at elevated temperatures. ce/papers, 9(2-3), 2330-2335. https://doi.org/10.1002/cepa.70622

Vancouver

Singh R, McCrum D, Samanta A. Local buckling performance of thin‐walled steel flexural members under axial and rotational restraint at elevated temperatures. ce/papers. 2026;9(2-3):2330-2335. doi:10.1002/cepa.70622

BibTeX
@article{Singh2026,
  author = {Singh, Ravikant and McCrum, Daniel and Samanta, Avik},
  title = {Local buckling performance of thin‐walled steel flexural members under axial and rotational restraint at elevated temperatures},
  journal = {ce/papers},
  year = {2026},
  volume = {9},
  number = {2-3},
  pages = {2330--2335},
  doi = {10.1002/cepa.70622}
}
Kostenlos starten →