Effect of surface preparation and adhesive type on CFRP–steel bridge joints
ce/papers · 2026-09 · 9 (2-3) · 80-85
DOI: 10.1002/cepa.70612 ↗Kurz gefasst
Fachartikel in der Zeitschrift ce/papers, online erschienen am 14.09.2026. Verfasst von Yasmina Boutar und 5 weiteren Autor:innen. Die Arbeit nennt 29 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
Strengthening steel bridges using carbon fibre reinforced polymer (CFRP) laminates is an effective technique to increase load‐carrying capacity and extend the service life of ageing infrastructure. The performance of CFRP strengthening systems depends strongly on the quality of the adhesive bond between steel and CFRP, making adhesive selection and surface preparation critical design parameters. This study experimentally investigates the influence of adhesive type and primer application on the bond behaviour of CFRP–steel joints manufactured using a wet‐layup technique. Mild steel substrates were sandblasted, with half of the specimens receiving an additional primer coating. Three commercially available structural epoxy adhesives were used to bond CFRP fabrics to steel substrates. A total of 18 CFRP–steel double‐lap joints were tested under quasi‐static shear loading. Load–displacement behaviour and shear strength were evaluated. The results show that both adhesive type and primer application significantly affect joint performance. While primer application improved consistency for some adhesive systems, it did not universally increase shear strength and, in certain cases, resulted in reduced capacity. The findings highlight the adhesive‐dependent nature of surface treatment effects and provide practical guidance for the design of durable CFRP strengthening systems for steel structures.
Zitieren
APA
Boutar, Y., Ryjáček, P., Hovorka, J., Jarolím, T., Montalbano, A., & Tichá, P. (2026). Effect of surface preparation and adhesive type on CFRP–steel bridge joints. ce/papers, 9(2-3), 80-85. https://doi.org/10.1002/cepa.70612
Vancouver
Boutar Y, Ryjáček P, Hovorka J, Jarolím T, Montalbano A, Tichá P. Effect of surface preparation and adhesive type on CFRP–steel bridge joints. ce/papers. 2026;9(2-3):80-85. doi:10.1002/cepa.70612
BibTeX
@article{Boutar2026,
author = {Boutar, Yasmina and Ryjáček, Pavel and Hovorka, Josef and Jarolím, Tomáš and Montalbano, Antonino and Tichá, Petra},
title = {Effect of surface preparation and adhesive type on CFRP–steel bridge joints},
journal = {ce/papers},
year = {2026},
volume = {9},
number = {2-3},
pages = {80--85},
doi = {10.1002/cepa.70612}
}
EUVIMED