EUVIMEDEUVIMED entdecken
Crossref

Review of the design criteria of friction connections for moment resisting steel frames

Roberto Carlevaris, Gregory Anthony MacRae, Roberto Tartaglia, Mario D'Aniello, Raffaele Landolfo

ce/papers · 2026-09 · 9 (2-3) · 855-860

DOI: 10.1002/cepa.70565 ↗

Kurz gefasst

Fachartikel in der Zeitschrift ce/papers, online erschienen am 14.09.2026. Verfasst von Roberto Carlevaris und 4 weiteren Autor:innen. Die Arbeit nennt 32 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The design criteria of European and New Zealand low‐damage friction connections for moment‐resisting steel frames for seismic applications are discussed and compared. These types of connections are designed to dissipate energy through controlled mechanisms, minimizing structural damage and allowing for rapid post‐earthquake recovery. The energy is dissipated through a controlled sliding between specifically detailed clamped plates. Two types of beam‐to‐column friction connections are considered: (i) the New Zealand Sliding Hinge Joint (SHJ), which features Asymmetric Friction Connections (AFC) on the beam web and bottom flange; and (ii) the European FREEDAM joint, in which a Symmetric Friction Connection (SFC) is located on a rib beneath the beam. The design procedure for each connection is outlined, along with a brief description of its key characteristics. Advanced finite element analyses are presented, including both monotonic and cyclic loading protocols, to assess the feasibility of the two connections as low‐damage seismic solutions and to compare their behaviour. The results demonstrate that both systems exhibit stable and predictable hysteretic loops. The SHJ requires minimal architectural interference but demands extensive bolting on the beam and welding to the column flange. Its moment‐rotation curve exhibits a stiffening branch during the sliding phase, which may be beneficial in limiting residual displacements after a seismic event. Conversely, the FREEDAM connection involves a set of tailor‐made components and greater material usage; however, it provides enhanced versatility, as the bolt preload can be adjusted to directly regulate the bending resistance of the joint.

Zitieren

APA

Carlevaris, R., MacRae, G. A., Tartaglia, R., D'Aniello, M., & Landolfo, R. (2026). Review of the design criteria of friction connections for moment resisting steel frames. ce/papers, 9(2-3), 855-860. https://doi.org/10.1002/cepa.70565

Vancouver

Carlevaris R, MacRae GA, Tartaglia R, D'Aniello M, Landolfo R. Review of the design criteria of friction connections for moment resisting steel frames. ce/papers. 2026;9(2-3):855-860. doi:10.1002/cepa.70565

BibTeX
@article{Carlevaris2026,
  author = {Carlevaris, Roberto and MacRae, Gregory Anthony and Tartaglia, Roberto and D'Aniello, Mario and Landolfo, Raffaele},
  title = {Review of the design criteria of friction connections for moment resisting steel frames},
  journal = {ce/papers},
  year = {2026},
  volume = {9},
  number = {2-3},
  pages = {855--860},
  doi = {10.1002/cepa.70565}
}
Kostenlos starten →