Stub column tests of cold‐formed steel channel sections with different stiffeners
ce/papers · 2026-09 · 9 (2-3) · 2421-2425
DOI: 10.1002/cepa.70562 ↗Kurz gefasst
Fachartikel in der Zeitschrift ce/papers, online erschienen am 14.09.2026. Verfasst von Ke‐Jiang Zhan und 3 weiteren Autor:innen. Die Arbeit nennt 11 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
A new type of cold‐formed steel channel section incorporating novel dovetail slot‐shaped stiffeners has recently been developed. These stiffeners not only enhance the section against local buckling but also function as connectors, enabling two individual channel sections to be formed into one built‐up section. This paper presents an experimental investigation into the stub column behaviour of such cold‐formed steel channel sections equipped with the proposed dovetail slot‐shaped stiffeners. For comparative purposes, traditional plain channel sections and two other types of channel sections with commonly used V‐shaped and bow‐shaped stiffeners were also examined. A total of 14 fixed‐ended stub column tests were carried out across these four section types. All specimens were brake‐pressed from the same batch of zinc‐coated steel sheets, with a nominal yield strength of 550 MPa and a nominal thickness of 1.2 mm. Initial local and distortional imperfections of the stub column specimens were measured using a coordinate measuring machine, and the actual material properties were obtained from tensile coupon tests. The static ultimate capacities, static load‐end shortening curves, and failure modes of these four series of cold‐formed steel channel section stub columns are presented in this paper. Test results demonstrate that, with a 25%–33% increase in steel consumption, these three types of stiffeners significantly improve the ultimate capacities of the plain channel sections by 208%–314%. Under identical outer dimensions and steel consumption, the bow‐shaped stiffeners provide the greatest enhancement to ultimate capacity compared to the plain channel section counterparts, as they further reduce the critical width‐to‐thickness ratios of both the web and the flanges.
Zitieren
APA
Zhan, K., Li, S., Chan, T., & Young, B. (2026). Stub column tests of cold‐formed steel channel sections with different stiffeners. ce/papers, 9(2-3), 2421-2425. https://doi.org/10.1002/cepa.70562
Vancouver
Zhan K, Li S, Chan T, Young B. Stub column tests of cold‐formed steel channel sections with different stiffeners. ce/papers. 2026;9(2-3):2421-2425. doi:10.1002/cepa.70562
BibTeX
@article{Zhan2026,
author = {Zhan, Ke‐Jiang and Li, Shuai and Chan, Tak‐Ming and Young, Ben},
title = {Stub column tests of cold‐formed steel channel sections with different stiffeners},
journal = {ce/papers},
year = {2026},
volume = {9},
number = {2-3},
pages = {2421--2425},
doi = {10.1002/cepa.70562}
}
EUVIMED