Numerical and experimental investigation of tapered thin‐walled steel beams and beam‐columns. Analysis of numerical results
ce/papers · 2026-09 · 9 (2-3) · 2017-2022
DOI: 10.1002/cepa.70555 ↗Kurz gefasst
Fachartikel in der Zeitschrift ce/papers, online erschienen am 14.09.2026. Verfasst von Oriana Ilnica und 3 weiteren Autor:innen. Die Arbeit nennt 11 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
Tapered thin‐walled steel members are increasingly used in structural engineering, particularly for spans of 20‐60 m, as they significantly reduce self‐weight and support more resource‐efficient and sustainable structures. However, the design of members is overly conservative and limit their practical application. This is mainly due to a limited consideration of the interaction between local and global instability modes, an inadequate treatment of material and geometric imperfections, and the lack of clear design guidance. To address these limitations, this research, carried out within the European project TaperFrame, aims to develop a more efficient design approach that enhances structural performance while minimizing material usage. This paper presents a numerical investigation on tapered members with different taper and slenderness ratios, subjected to bending, with and without axial load, aimed at designing experimental tests. In this respect, a preliminary numerical study was conducted to define the test specimens and experimental setup. Nonlinear finite element analyses were performed in Abaqus, accounting for local and global geometric imperfections as well as material imperfections due to residual stresses. A comprehensive description of the numerical analysis and the design of the specimens will be thoroughly reported.
Zitieren
APA
Ilnica, O., Zanon, G., Couto, C., & Tondini, N. (2026). Numerical and experimental investigation of tapered thin‐walled steel beams and beam‐columns. Analysis of numerical results. ce/papers, 9(2-3), 2017-2022. https://doi.org/10.1002/cepa.70555
Vancouver
Ilnica O, Zanon G, Couto C, Tondini N. Numerical and experimental investigation of tapered thin‐walled steel beams and beam‐columns. Analysis of numerical results. ce/papers. 2026;9(2-3):2017-2022. doi:10.1002/cepa.70555
BibTeX
@article{Ilnica2026,
author = {Ilnica, Oriana and Zanon, Gabriele and Couto, Carlos and Tondini, Nicola},
title = {Numerical and experimental investigation of tapered thin‐walled steel beams and beam‐columns. Analysis of numerical results},
journal = {ce/papers},
year = {2026},
volume = {9},
number = {2-3},
pages = {2017--2022},
doi = {10.1002/cepa.70555}
}
EUVIMED