EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Comparative Study on the High‐Cycle Fatigue Performance of Bolted Steel Joints Produced Using Different Laser Cutting

Hasan N. Olmez, Gabriele Zanon, Stefano Marelli, Oreste S. Bursi, Marco Brugnolli, Mattia Vanin

ce/papers · 2026-09 · 9 (2-3) · 2704-2708

DOI: 10.1002/cepa.70513 ↗

Kurz gefasst

Fachartikel in der Zeitschrift ce/papers, online erschienen am 14.09.2026. Verfasst von Hasan N. Olmez und 5 weiteren Autor:innen. Die Arbeit nennt 12 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Laser cutting is widely used in the fabrication of structural‐steel components, yet its influence on fatigue‐critical bolt‐hole edges remains insufficiently quantified. This study presents a comparative high‐cycle fatigue investigation of S355 bolted joints manufactured using four fiber‐laser cutting configurations: standard oxygen‐assisted, high‐quality oxygen‐assisted, nitrogen‐assisted, and air‐assisted cutting to investigate the role of assist‐gas regime and parameter tuning on fatigue behavior. S–N data were obtained by means of high cycle fatigue tests and interpreted using probabilistic models and benchmarked against FAT71 classification proposed in the next‐generation Eurocode 3 draft. Oxygen‐assisted cutting that produced high‐quality cut surfaces exhibited the highest fatigue resistance, with characteristic strengths exceeding those associated with the FAT 71 classification. In contrast, specimens cut using nitrogen or air demonstrated a comparatively lower fatigue performance; however, their fatigue behavior still satisfied the requirements of the FAT 71 curve. The findings highlight the relationship between high‐cycle fatigue response and the laser cutting process and consequently the importance of selecting the most appropriate laser cutting process to maximize high‐cycle fatigue performance.

Zitieren

APA

Olmez, H. N., Zanon, G., Marelli, S., Bursi, O. S., Brugnolli, M., & Vanin, M. (2026). Comparative Study on the High‐Cycle Fatigue Performance of Bolted Steel Joints Produced Using Different Laser Cutting. ce/papers, 9(2-3), 2704-2708. https://doi.org/10.1002/cepa.70513

Vancouver

Olmez HN, Zanon G, Marelli S, Bursi OS, Brugnolli M, Vanin M. Comparative Study on the High‐Cycle Fatigue Performance of Bolted Steel Joints Produced Using Different Laser Cutting. ce/papers. 2026;9(2-3):2704-2708. doi:10.1002/cepa.70513

BibTeX
@article{Olmez2026,
  author = {Olmez, Hasan N. and Zanon, Gabriele and Marelli, Stefano and Bursi, Oreste S. and Brugnolli, Marco and Vanin, Mattia},
  title = {Comparative Study on the High‐Cycle Fatigue Performance of Bolted Steel Joints Produced Using Different Laser Cutting},
  journal = {ce/papers},
  year = {2026},
  volume = {9},
  number = {2-3},
  pages = {2704--2708},
  doi = {10.1002/cepa.70513}
}
Kostenlos starten →