EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Evaluation of the Frame Expansion Effect in Self‐Centring Beam‐to‐Column Subassemblies

Elena Elettore, Ali Roumieh, Massimo Latour, Fabio Freddi, Sabatino Di Benedetto, Antonella B. Francavilla, Fernando Gutiérrez‐Urzúa, Ludovica Pieroni, Shahab Ramhormozian, Barbara Simpson, Andre R. Barbosa, Gianvittorio Rizzano und 3 weitere

ce/papers · 2026-09 · 9 (2-3) · 748-753

DOI: 10.1002/cepa.70460 ↗

Kurz gefasst

Fachartikel in der Zeitschrift ce/papers, online erschienen am 14.09.2026. Verfasst von Elena Elettore und 14 weiteren Autor:innen. Die Arbeit nennt 24 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Conventional code‐based seismic design methods rely on dissipating seismic energy through structural damage. While this approach ensures life safety, it often results in significant post‐earthquake damage, leading to substantial direct and indirect losses that affect community resilience. Modern earthquake engineering seeks to overcome these limitations by developing high‐performance, cost‐effective structures capable of withstanding design‐level earthquakes with minimal socio‐economic impact. In this framework, the ERIES‐SC‐RESTEEL (Self‐Centring seismic‐RESilient sTEEL structures) project investigates the seismic response, repairability, and resilience of innovative steel self‐centring Moment Resisting Frames (MRFs) equipped with friction devices and post‐tensioned bars at Beam‐to‐Column joints (BCJs) and Column Bases (CBs). The experimental programme includes large‐scale shaking‐table tests on a three‐storey steel MRF carried out at LNEC (Laboratório Nacional de Engenharia Civil) in Lisbon, Portugal. Prior to the shake‐table test, quasi‐static cyclic tests were conducted on MRF subassemblies at the University of Salerno, Italy, to assess the response of resilient BCJ subassemblies and to develop novel solutions to mitigate the frame‐expansion effect caused by beam rocking. A parametric experimental analysis was conducted on the tested subassemblies, considering different combinations of frictional and self‐centring forces, to investigate the key design parameters influencing the joint behaviour. The experimental results provided valuable insights into the design methodology for the mock‐up structure used in the shake table tests.

Zitieren

APA

Elettore, E., Roumieh, A., Latour, M., Freddi, F., Benedetto, S. D., Francavilla, A. B., Gutiérrez‐Urzúa, F., Pieroni, L., Ramhormozian, S., Simpson, B., Barbosa, A. R., Rizzano, G., Grant, D. N., Ribeiro, F. L., & Correia, A. A. (2026). Evaluation of the Frame Expansion Effect in Self‐Centring Beam‐to‐Column Subassemblies. ce/papers, 9(2-3), 748-753. https://doi.org/10.1002/cepa.70460

Vancouver

Elettore E, Roumieh A, Latour M, Freddi F, Benedetto SD, Francavilla AB, et al. Evaluation of the Frame Expansion Effect in Self‐Centring Beam‐to‐Column Subassemblies. ce/papers. 2026;9(2-3):748-753. doi:10.1002/cepa.70460

BibTeX
@article{Elettore2026,
  author = {Elettore, Elena and Roumieh, Ali and Latour, Massimo and Freddi, Fabio and Benedetto, Sabatino Di and Francavilla, Antonella B. and Gutiérrez‐Urzúa, Fernando and Pieroni, Ludovica and Ramhormozian, Shahab and Simpson, Barbara and Barbosa, Andre R. and Rizzano, Gianvittorio and Grant, Damian N. and Ribeiro, Filipe L. and Correia, Antonio A.},
  title = {Evaluation of the Frame Expansion Effect in Self‐Centring Beam‐to‐Column Subassemblies},
  journal = {ce/papers},
  year = {2026},
  volume = {9},
  number = {2-3},
  pages = {748--753},
  doi = {10.1002/cepa.70460}
}
Kostenlos starten →