Experimental and numerical study of steel shear wall for retrofitting of steel structures
ce/papers · 2026-09 · 9 (2-3) · 2565-2569
DOI: 10.1002/cepa.70447 ↗Kurz gefasst
Fachartikel in der Zeitschrift ce/papers, online erschienen am 14.09.2026. Verfasst von Natalia Lasowicz und 6 weiteren Autor:innen. Die Arbeit nennt 22 Literaturangaben.
Abstract (Originalsprache)
The main purpose of this study is to retrofit the steel damaged structure that experienced permanent deformation, known as residual drift (RD), by installation of steel shear wall (SSW). SSW is a structural system that provides lateral resistance against seismic loads in structures. In the first stage of the consideration, the behavior of steel frame that experienced different values of RD and retrofitted with SSW having different thicknesses were investigated experimentally. In the second stage of the study a detailed finite element (FE) model of the steel shear wall was generated in ABAQUS software in order to predict its effectiveness in real‐scale steel damaged structure. The model was validated according to experimental test results, then, it was used to perform numerical analyses where different geometrical and material properties of SSW were analyzed. Moreover, the behavior of steel structure that experienced different values of RD and retrofitted with SSW were investigated. Analysis of the obtained results indicates that the use of SSW in a steel frame subjected to cyclic loading increases its load‐bearing capacity. The use of SSW in the structure can affect in its performance, since it has an increasing effect on hysteresis behavior. This show that the idea of using SSW in damaged structure can be considered as potential retrofitting strategy.
Zitieren
APA
Lasowicz, N., Asgarkhani, N., Kazemi, F., Tomaszewska, A., Bera, A., Kowalski, J., & Jankowski, R. (2026). Experimental and numerical study of steel shear wall for retrofitting of steel structures. ce/papers, 9(2-3), 2565-2569. https://doi.org/10.1002/cepa.70447
Vancouver
Lasowicz N, Asgarkhani N, Kazemi F, Tomaszewska A, Bera A, Kowalski J, et al. Experimental and numerical study of steel shear wall for retrofitting of steel structures. ce/papers. 2026;9(2-3):2565-2569. doi:10.1002/cepa.70447
BibTeX
@article{Lasowicz2026,
author = {Lasowicz, Natalia and Asgarkhani, Neda and Kazemi, Farzin and Tomaszewska, Agnieszka and Bera, Alicja and Kowalski, Jakub and Jankowski, Robert},
title = {Experimental and numerical study of steel shear wall for retrofitting of steel structures},
journal = {ce/papers},
year = {2026},
volume = {9},
number = {2-3},
pages = {2565--2569},
doi = {10.1002/cepa.70447}
}
EUVIMED