Bending Behaviour of Stainless Steel I‐beams with Sinusoidal Corrugated Webs
ce/papers · 2026-09 · 9 (2-3) · 311-316
DOI: 10.1002/cepa.70433 ↗Kurz gefasst
Fachartikel in der Zeitschrift ce/papers, online erschienen am 14.09.2026. Verfasst von Gábor Hajdú. Die Arbeit nennt 22 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
This paper presents an experimental and numerical study on stainless steel I‐beams with sinusoidal corrugated webs. To explore the bending behaviour of stainless steel sinusoidal corrugated web girders two full‐scale specimens were tested under four‐point bending conditions. The tested corrugated web beams were made of 1.4301 austenitic stainless steel material. The results of the experimental tests showed that the beams could exceed their nominal yield strength. At the ultimate load level, lateral‐torsional buckling and flange buckling failure modes were observed. Based on the results of the experimental tests advanced finite element models were built and validated in order to run a numerical parametric study. The comparison with Eurocode provisions shows that buckling curved can yield safe and unsafe predictions across the investigated parameter range, while the EN 1993‐1‐4:2025 proposal provides generally safe results but the imperfection factor can be further improved.
Zitieren
APA
Hajdú, G. (2026). Bending Behaviour of Stainless Steel I‐beams with Sinusoidal Corrugated Webs. ce/papers, 9(2-3), 311-316. https://doi.org/10.1002/cepa.70433
Vancouver
Hajdú G. Bending Behaviour of Stainless Steel I‐beams with Sinusoidal Corrugated Webs. ce/papers. 2026;9(2-3):311-316. doi:10.1002/cepa.70433
BibTeX
@article{Hajd2026,
author = {Hajdú, Gábor},
title = {Bending Behaviour of Stainless Steel I‐beams with Sinusoidal Corrugated Webs},
journal = {ce/papers},
year = {2026},
volume = {9},
number = {2-3},
pages = {311--316},
doi = {10.1002/cepa.70433}
}
EUVIMED