EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC-ND 4.0

Nonlinear Modelling of a Steel‐Timber Diaphragm with Nailed Connections

Sebastian T. Akanji, Adam R. Phillips, Della Thomas, Erica Fischer

ce/papers · 2026-09 · 9 (2-3) · 1242-1247

DOI: 10.1002/cepa.70422 ↗

Kurz gefasst

Fachartikel in der Zeitschrift ce/papers, online erschienen am 14.09.2026. Verfasst von Sebastian T. Akanji und 3 weiteren Autor:innen. Die Arbeit nennt 19 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-ND 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Mass timber diaphragms are being increasingly used in the United States as part of the lateral force resisting system in steel framed buildings. To ensure robust performance of these structural systems, it is critical to know the mechanism of failure and be able to predict deformation of the diaphragm under extreme loading conditions. This paper presents the nonlinear modelling of a steel‐timber diaphragm test that had nailed spline and tension chord splice connections. The diaphragm specimen was 2.4 m × 7.2 m and was supported at both ends. The diaphragm was attached to the steel frame using 6.4 mm self‐tapping screws. Test results demonstrate that the diaphragm had significant cyclic ductility, but relatively low stiffness. The modelling was completed in SAP2000, which is a commercial software program common in industry. The nonlinear behaviour of each of the diaphragm connections was characterized in orthogonal directions based on small‐scale testing or data from the literature. Results from the test show that the diaphragm failed in the intended mechanism according to American Wood Council code provisions. Good agreement between the nonlinear model and the test demonstrate what modelling procedures should be employed to accurately capture the behaviour of these systems. Finally, a deflection prediction equation from the literature was shown to well predict the test specimen deflection.

Zitieren

APA

Akanji, S. T., Phillips, A. R., Thomas, D., & Fischer, E. (2026). Nonlinear Modelling of a Steel‐Timber Diaphragm with Nailed Connections. ce/papers, 9(2-3), 1242-1247. https://doi.org/10.1002/cepa.70422

Vancouver

Akanji ST, Phillips AR, Thomas D, Fischer E. Nonlinear Modelling of a Steel‐Timber Diaphragm with Nailed Connections. ce/papers. 2026;9(2-3):1242-1247. doi:10.1002/cepa.70422

BibTeX
@article{Akanji2026,
  author = {Akanji, Sebastian T. and Phillips, Adam R. and Thomas, Della and Fischer, Erica},
  title = {Nonlinear Modelling of a Steel‐Timber Diaphragm with Nailed Connections},
  journal = {ce/papers},
  year = {2026},
  volume = {9},
  number = {2-3},
  pages = {1242--1247},
  doi = {10.1002/cepa.70422}
}
Kostenlos starten →