Restoring corroded steel members for circularity via Wire Arc Additive Manufacturing‐Based repair
ce/papers · 2026-09 · 9 (2-3) · 192-197
DOI: 10.1002/cepa.70395 ↗Kurz gefasst
Fachartikel in der Zeitschrift ce/papers, online erschienen am 14.09.2026. Verfasst von Cheng Zhang und 3 weiteren Autor:innen. Die Arbeit nennt 17 Literaturangaben.
Abstract (Originalsprache)
With the growing emphasis on the circularity in steel construction, direct reuse of steel members has been attracting increasing attention as a promising approach. The long‐standing issue on steel corrosion accumulated during the long‐term service will weaken the bearing capacity of these members, which is a major obstacle to direct reuse. Effective repair of the reclaimed corroded steel members is therefore essential to facilitate the reuse and contribute to the realisation of circularity in construction. Current repair methods, such as steel plate bonding, FRP wrapping and concrete reinforcement, can restore the bearing capacity of corroded steel members. Nevertheless, these techniques often alter the geometry of members or suffer from insufficient long‐term performance. To address these limitations, this study investigates the use of wire arc additive manufacturing (WAAM) as a repair method for corroded steel members. The proposed method aims to achieve effective repair which can realise strong metallurgical bonding, geometry restoration, and full recovery of bearing capacity. An experiment of repairing a steel plate with artificial uniform corrosion was conducted to demonstrate the effectiveness of WAAM‐based repair. Furthermore, the influence of corrosion morphology, such as depth, diameter and density of corrosion pits, on the repair effectiveness of WAAM was also investigated. The findings are expected to further demonstrate the feasibility of WAAM‐based repair for reclaimed steel members.
Zitieren
APA
Zhang, C., Liu, H., Wang, Y., & Chan, T. (2026). Restoring corroded steel members for circularity via Wire Arc Additive Manufacturing‐Based repair. ce/papers, 9(2-3), 192-197. https://doi.org/10.1002/cepa.70395
Vancouver
Zhang C, Liu H, Wang Y, Chan T. Restoring corroded steel members for circularity via Wire Arc Additive Manufacturing‐Based repair. ce/papers. 2026;9(2-3):192-197. doi:10.1002/cepa.70395
BibTeX
@article{Zhang2026,
author = {Zhang, Cheng and Liu, Haixin and Wang, Yixun and Chan, Tak‐Ming},
title = {Restoring corroded steel members for circularity via Wire Arc Additive Manufacturing‐Based repair},
journal = {ce/papers},
year = {2026},
volume = {9},
number = {2-3},
pages = {192--197},
doi = {10.1002/cepa.70395}
}
EUVIMED