Evaluation of welded bridge hangers using 3D surface scans
ce/papers · 2026-09 · 9 (2-3) · 1823-1828
DOI: 10.1002/cepa.70373 ↗Kurz gefasst
Fachartikel in der Zeitschrift ce/papers, online erschienen am 14.09.2026. Verfasst von Kai Stephan Betz und 2 weiteren Autor:innen. Die Arbeit nennt 12 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
In bridges with tied arches, the welds of the suspensions are often the critical fatigue details. In this case, it was assumed that the fatigue strength of the connection detail between the hanger plate and the longitudinal girder would be significantly reduced due to poor weld quality combined with severe corrosion damage. To get more detailed insight on the actual fatigue resistance of each hanger, 3D surface scan data of the weld seams was recorded and evaluated. In this paper, an overview on the measuring setup and the difficulties of recording 3D surface scans under traffic operation and varying outside weather conditions is presented. The recorded 3D surface scan data is then used to evaluate weld seam surface imperfections according to DIN EN 5817. Weld toe angles, weld convexity and weld asymmetry are checked and quantified based on the 3D surface scan data. Afterwards, the 3D surface scan data is used to create numerical models of the individual hanger connection plate weld seams. In the following, the surface scan models are used to calculate notch shape factors in critical hotspot areas of the hanger weld seams. The calculated stress concentrations are compared to the previously measured surface imperfections and the geometry change due to the weld seam corrosion.
Zitieren
APA
Betz, K. S., Weidner, P., & Ummenhofer, T. (2026). Evaluation of welded bridge hangers using 3D surface scans. ce/papers, 9(2-3), 1823-1828. https://doi.org/10.1002/cepa.70373
Vancouver
Betz KS, Weidner P, Ummenhofer T. Evaluation of welded bridge hangers using 3D surface scans. ce/papers. 2026;9(2-3):1823-1828. doi:10.1002/cepa.70373
BibTeX
@article{Betz2026,
author = {Betz, Kai Stephan and Weidner, Philipp and Ummenhofer, Thomas},
title = {Evaluation of welded bridge hangers using 3D surface scans},
journal = {ce/papers},
year = {2026},
volume = {9},
number = {2-3},
pages = {1823--1828},
doi = {10.1002/cepa.70373}
}
EUVIMED