Linking geometry characteristics and structural properties of mild steel plates manufactured by wire arc additive manufacturing
ce/papers · 2026-09 · 9 (2-3) · 463-468
DOI: 10.1002/cepa.70358 ↗Kurz gefasst
Fachartikel in der Zeitschrift ce/papers, online erschienen am 14.09.2026. Verfasst von Nils Rittich und 5 weiteren Autor:innen. Die Arbeit nennt 15 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
Wire arc additive manufacturing (WAAM) is a promising technology for the fabrication of steel components. Through the targeted deposition of material, expensive subtractive methods can be avoided to produce near‐net‐shape parts. Restrictions arise mainly due to the lack of normative codes for WAAM in structural steel. Codes for conventional products are not applicable, since WAAM parts show significant surface anisotropy as well as residual stresses. In order to lay the foundation for future normative work, this study aims at establishing a connection between geometric features and material properties. WAAM flat sheets are 3D scanned and analyzed geometrically with properties from codes for conventional parts. Subsequent static and cyclic tests are evaluated with respect to the geometric features determined beforehand. The static strength is found to be dependent on the fracture cross‐section, which can be derived from the average part thickness based on safety factors. Cyclic tests with varying stress ranges return a S‐N curve slope of m=5 and show a minor correlation between fatigue life and maximum roughness. In order to derive classes for a class‐based categorization, the evaluation needs to be conducted with a larger dataset possessing higher degrees of variation of the parameters.
Zitieren
APA
Rittich, N., Bartsch, H., Feldmann, M., Mierzwa, M., Kellerwessel, J., & Sharma, R. (2026). Linking geometry characteristics and structural properties of mild steel plates manufactured by wire arc additive manufacturing. ce/papers, 9(2-3), 463-468. https://doi.org/10.1002/cepa.70358
Vancouver
Rittich N, Bartsch H, Feldmann M, Mierzwa M, Kellerwessel J, Sharma R. Linking geometry characteristics and structural properties of mild steel plates manufactured by wire arc additive manufacturing. ce/papers. 2026;9(2-3):463-468. doi:10.1002/cepa.70358
BibTeX
@article{Rittich2026,
author = {Rittich, Nils and Bartsch, Helen and Feldmann, Markus and Mierzwa, Max and Kellerwessel, Johannes and Sharma, Rahul},
title = {Linking geometry characteristics and structural properties of mild steel plates manufactured by wire arc additive manufacturing},
journal = {ce/papers},
year = {2026},
volume = {9},
number = {2-3},
pages = {463--468},
doi = {10.1002/cepa.70358}
}
EUVIMED