Improved Brace Design for the Stability of Steel Trusses Using the Reduced Stiffness Method
ce/papers · 2026-09 · 9 (2-3) · 1987-1992
DOI: 10.1002/cepa.70349 ↗Kurz gefasst
Fachartikel in der Zeitschrift ce/papers, online erschienen am 14.09.2026. Verfasst von Tadeusz Zwoliński und 1 weiteren Autor:innen. Die Arbeit nennt 16 Literaturangaben.
Abstract (Originalsprache)
The objective of this study is to evaluate the influence of brace stiffness on the inelastic buckling behaviour of tubular steel truss systems. Adequate brace design is critical for structural safety, yet brace stiffness requirements are often underestimated in practice, as current Eurocode provisions primarily address brace strength rather than stiffness. Parallel girders interconnected by purlins and X‐type bracing composed of circular rods are analysed. The girders are simply supported, with chords and diagonals designed from square hollow sections (SHS) of S355 steel. Loading is applied at the top‐chord nodes. A comparative numerical study is performed for varying brace stiffnesses using Linear Buckling Analysis (LBA) with stiffness reduction coefficients derived from European buckling curves. The Reduced Stiffness Method (RSM) is extended to global truss systems, and its predictions are compared with the conventional Eurocode EC3‐LBA approach. Validation against available experimental data, and studies of individual members shows differences within 8%. Structural efficiency, expressed as a capacity‐to‐self‐weight ratio, is used as a comparative metric, with differences of up to 37% observed between the two approaches. The results demonstrate that brace stiffness has a significant influence on the global stability of truss systems. The proposed approach represents a consistent and design‐oriented methodology for evaluating the stability of truss systems, integrating global interaction effects and supporting the determination of bracing requirements. Detailed validation against full‐scale truss experiments and advanced nonlinear analyses is beyond the scope of this conference paper.
Zitieren
APA
Zwoliński, T., & Dmowska‐Michalak, I. (2026). Improved Brace Design for the Stability of Steel Trusses Using the Reduced Stiffness Method. ce/papers, 9(2-3), 1987-1992. https://doi.org/10.1002/cepa.70349
Vancouver
Zwoliński T, Dmowska‐Michalak I. Improved Brace Design for the Stability of Steel Trusses Using the Reduced Stiffness Method. ce/papers. 2026;9(2-3):1987-1992. doi:10.1002/cepa.70349
BibTeX
@article{Zwoliski2026,
author = {Zwoliński, Tadeusz and Dmowska‐Michalak, Izabela},
title = {Improved Brace Design for the Stability of Steel Trusses Using the Reduced Stiffness Method},
journal = {ce/papers},
year = {2026},
volume = {9},
number = {2-3},
pages = {1987--1992},
doi = {10.1002/cepa.70349}
}
EUVIMED