EUVIMEDEUVIMED entdecken
Crossref

Numerical performance of T‐stubs with 4‐Bolts in line

Francesco Monte, Roberto Tartaglia, Giuseppe Maddaloni

ce/papers · 2026-09 · 9 (2-3) · 1735-1739

DOI: 10.1002/cepa.70328 ↗

Kurz gefasst

Fachartikel in der Zeitschrift ce/papers, online erschienen am 14.09.2026. Verfasst von Francesco Monte und 2 weiteren Autor:innen. Die Arbeit nennt 27 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The ultimate capacity and ductility of T‐stubs are crucial to part of designing bolted end‐plate connections. However, the current version of the component method implemented in the EN1993‐1‐8 provides detailed rules that are limited to T‐stub connections with only two bolts per horizontal row. The aim of the present study is to extend the results of experimental results already performed in literature on 4‐bolts T‐stubs by means of a numerical parametrical analysis. The 4 bolts T‐stubs were specifically designed to exhibit the three typical failure modes (FM). Based on the experimental results, advanced finite element models (FEM) were developed and calibrated. These models were then used to parametrically investigate how geometrical properties influence the resistance and ductility of four‐bolt T‐stubs under monotonic loads. The results show that adding an extra row of bolts doesn't significantly affect the resistance of T‐stubs with thin flanges, where Failure Mode 1 was predicted. However, a beneficial effect on the T‐stub's behaviour was observed when Failure Modes 2 or 3 occurred.

Zitieren

APA

Monte, F., Tartaglia, R., & Maddaloni, G. (2026). Numerical performance of T‐stubs with 4‐Bolts in line. ce/papers, 9(2-3), 1735-1739. https://doi.org/10.1002/cepa.70328

Vancouver

Monte F, Tartaglia R, Maddaloni G. Numerical performance of T‐stubs with 4‐Bolts in line. ce/papers. 2026;9(2-3):1735-1739. doi:10.1002/cepa.70328

BibTeX
@article{Monte2026,
  author = {Monte, Francesco and Tartaglia, Roberto and Maddaloni, Giuseppe},
  title = {Numerical performance of T‐stubs with 4‐Bolts in line},
  journal = {ce/papers},
  year = {2026},
  volume = {9},
  number = {2-3},
  pages = {1735--1739},
  doi = {10.1002/cepa.70328}
}
Kostenlos starten →