Niobium‐Based Surface Engineering Enables High Rate and Cycling Stability of High‐Voltage LiNi 0.5 Mn 1.5 O 4 Cathode
ChemElectroChem · 2026-01 · 13 (2)
DOI: 10.1002/celc.202500412 ↗Kurz gefasst
Fachartikel in der Zeitschrift ChemElectroChem, online erschienen am 28.01.2026. Verfasst von Jiaqi Ke und 6 weiteren Autor:innen. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 46 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: University of Texas at Dallas.
Abstract (Originalsprache)
LiNi 0.5 Mn 1.5 O 4 (LNMO) is a promising high‐voltage cathode for next‐generation lithium‐ion batteries (LIBs) due to its high operating potential, low cost, and cobalt‐free composition. However, severe interfacial degradation and structural instability at 4.9 V hinder its practical application. In this work, a uniform niobium‐based coating was constructed on LNMO via a scalable sol–gel‐assisted solution process. The Nb surface layer provides the mechanical stabilization to maintain the cathode structure and suppress interfacial side reactions. In addition, it enhances Li + diffusion kinetics and is beneficial for the formation of a robust, inorganic‐rich cathode–electrolyte interphase. The optimized Nb‐LNMO electrode exhibits superior rate capability and cycling stability, retaining 98.3% capacity retention after 200 cycles at 0.3 C in LNMO|Li cells between 3.5–4.9 V, compared to 83.5% for pristine LNMO. This work highlights an effective Nb‐based interfacial engineering strategy that reinforces both structural and chemical stability, providing a general approach for designing durable high‐voltage cathodes for advanced LIBs.
Förderung
- University of Texas at Dallas
Zitieren
APA
Ke, J., Gatts, J., Tan, Y., Wang, B., Monteiro, R., Biswal, P., & Su, L. (2026). Niobium‐Based Surface Engineering Enables High Rate and Cycling Stability of High‐Voltage LiNi 0.5 Mn 1.5 O 4 Cathode. ChemElectroChem, 13(2). https://doi.org/10.1002/celc.202500412
Vancouver
Ke J, Gatts J, Tan Y, Wang B, Monteiro R, Biswal P, et al. Niobium‐Based Surface Engineering Enables High Rate and Cycling Stability of High‐Voltage LiNi 0.5 Mn 1.5 O 4 Cathode. ChemElectroChem. 2026;13(2). doi:10.1002/celc.202500412
BibTeX
@article{Ke2026,
author = {Ke, Jiaqi and Gatts, Jordan and Tan, Yuan and Wang, Boyu and Monteiro, Robson and Biswal, Prayag and Su, Laisuo},
title = {Niobium‐Based Surface Engineering Enables High Rate and Cycling Stability of High‐Voltage LiNi 0.5 Mn 1.5 O 4 Cathode},
journal = {ChemElectroChem},
year = {2026},
volume = {13},
number = {2},
doi = {10.1002/celc.202500412}
}
EUVIMED