Solid Particle Suspension Characteristics in a Self‐Priming Jet Stirred Tank
Chemical Engineering & Technology · 2026-11 · 49 (11)
DOI: 10.1002/ceat.70343 ↗Kurz gefasst
Fachartikel in der Zeitschrift Chemical Engineering & Technology, online erschienen am 16.11.2026. Verfasst von Jing Zhang und 4 weiteren Autor:innen. Die Arbeit nennt 21 Literaturangaben.
Abstract (Originalsprache)
Stirring operation focusing on particle suspension was widely used in the solid–liquid two‐phase mixing process. The suspension characteristics of solid particles in a self‐priming jet stirring tank were investigated through a combination of numerical simulation and experimental verification. Results showed that the self‐priming jet stirring impeller promoted axial flow and suspension of sedimented particles at the tank bottom. Increasing the jet pipe inner diameter d i from 6 to 20 mm significantly reduced the volume ratio of the dead‐zone at the tank top. When d i was limited from 10 to 14 mm, the jet Reynolds number was improved, the particle slip velocity was reduced, and more solid particles suspended in the tank.
Zitieren
APA
Zhang, J., Zhang, J., Wang, Z., Jiang, Z., & Gong, B. (2026). Solid Particle Suspension Characteristics in a Self‐Priming Jet Stirred Tank. Chemical Engineering & Technology, 49(11). https://doi.org/10.1002/ceat.70343
Vancouver
Zhang J, Zhang J, Wang Z, Jiang Z, Gong B. Solid Particle Suspension Characteristics in a Self‐Priming Jet Stirred Tank. Chemical Engineering & Technology. 2026;49(11). doi:10.1002/ceat.70343
BibTeX
@article{Zhang2026,
author = {Zhang, Jing and Zhang, Jingyi and Wang, Zhonghao and Jiang, Zhexuan and Gong, Bin},
title = {Solid Particle Suspension Characteristics in a Self‐Priming Jet Stirred Tank},
journal = {Chemical Engineering & Technology},
year = {2026},
volume = {49},
number = {11},
doi = {10.1002/ceat.70343}
}
EUVIMED