EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Improving Thermal Transport in Carbon Nanotube Films Through Interface and Structural Optimization

Sohail Aamar Malik, Rui Zhao, Dongxu Zhang

Carbon and Hydrogen · 10.11.2026

DOI: 10.1002/cbh2.70088 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Carbon and Hydrogen, online erschienen am 10.11.2026. Verfasst von Sohail Aamar Malik und 2 weiteren Autor:innen. Die Arbeit nennt 19 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Carbon nanotube (CNT) films have significant potential for thermal management applications; however, their effective thermal conductivity remains substantially lower than that of individual CNTs because of microstructural effects and interfacial thermal resistance (ITR). This study investigates the influence of CNT alignment, film density, tube length, temperature, and interfacial thermal resistance on heat transport in CNT films using nonequilibrium molecular dynamics (NEMD) simulations. Approximately 400 independent molecular dynamics simulations were performed using LAMMPS with the AIREBO potential. CNT lengths ranging from 50 to 2000 nm and film densities from 0.6 to 1.3 g/cm 3 were investigated, together with three distinct alignment states: random, partially aligned, and fully aligned. The results indicate that interfacial thermal resistance is a major factor governing the thermal performance of CNT films. Films with interfacial thermal resistance below 3–5 × 10 −8 m 2 K/W exhibited thermal conductivity values of approximately 200–300 W/m K, whereas films with higher interfacial thermal resistance showed substantially lower thermal conductivity of approximately 50–100 W/m K. Increasing CNT alignment enhanced thermal conductivity by approximately 50%–70% compared with randomly oriented films, whereas the optimum density range was approximately 1.0–1.3 g/cm 3 . Further increases in density resulted in additional tube‐to‐tube junctions and associated thermal resistance, limiting the improvement in thermal conductivity. CNT length showed a secondary influence, with relatively modest improvements beyond approximately 300 nm, while temperature variations between 250 and 500 K produced no statistically significant effect on thermal conductivity. Overall, the findings identify interfacial thermal resistance and CNT alignment as key factors for improving thermal transport in CNT films and provide quantitative design guidance for optimizing CNT‐film microstructures for thermal management applications.

Zitieren

APA

Malik, S. A., Zhao, R., & Zhang, D. (2026). Improving Thermal Transport in Carbon Nanotube Films Through Interface and Structural Optimization. Carbon and Hydrogen. https://doi.org/10.1002/cbh2.70088

Vancouver

Malik SA, Zhao R, Zhang D. Improving Thermal Transport in Carbon Nanotube Films Through Interface and Structural Optimization. Carbon and Hydrogen. 2026. doi:10.1002/cbh2.70088

BibTeX
@article{Malik2026,
  author = {Malik, Sohail Aamar and Zhao, Rui and Zhang, Dongxu},
  title = {Improving Thermal Transport in Carbon Nanotube Films Through Interface and Structural Optimization},
  journal = {Carbon and Hydrogen},
  year = {2026},
  doi = {10.1002/cbh2.70088}
}
Kostenlos starten →