EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Ruthenium‐Based Catalysts Supported on Lanthanum and Carbon‐Modified Alumina for Low‐Pressure Ammonia Synthesis

Xiang Li, Guandong Wu, Yufei He, Dianqing Li

Carbon and Hydrogen · 2026-06 · 28 (2) · 255-268

DOI: 10.1002/cbh2.70063 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Carbon and Hydrogen, online erschienen am 09.05.2026. Verfasst von Xiang Li und 3 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 48 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Low‐pressure ammonia synthesis technology holds revolutionary significance in ensuring food security, promoting energy transition, and addressing climate change. However, the hydrogen poisoning of catalysts has long restricted the development of low‐pressure ammonia synthesis processes. Focusing on the regulation of support surface properties, this study successfully prepared a Ru/Al 2 O 3 ‐La‐C catalyst. By regulating the transfer and desorption pathways of hydrogen on the catalyst surface, the hydrogen poisoning phenomenon under low‐pressure conditions was effectively alleviated. Under the reaction conditions of 400°C and 3 MPa, the ammonia synthesis yield of the Ru/Al 2 O 3 ‐La‐C catalyst reached 4.74 mmol NH 3 ·g cat −1 ·h −1 , which was 10 times higher than that of the unmodified Ru/Al 2 O 3 catalyst. Meanwhile, the reaction order of hydrogen changed from −0.43 to 0.58, and the reaction order of nitrogen changed from 0.98 to 0.44, further confirming that the hydrogen poisoning issue of the catalyst was significantly improved and the activation of nitrogen was promoted. Characterization results from H 2 ‐TPD and H‐D exchange experiments showed that La doping constructed La‐O sites, which facilitated the transfer of active hydrogen from the active component Ru to the support. In contrast, the introduction of carbon regulated the recombination and desorption mode of hydrogen on the surface of metallic Ru, prompting hydrogen to desorb in the form of H 2 instead of forming H 2 O. This study provides a new insight for the design and development of catalysts for low‐pressure ammonia synthesis.

Zitieren

APA

Li, X., Wu, G., He, Y., & Li, D. (2026). Ruthenium‐Based Catalysts Supported on Lanthanum and Carbon‐Modified Alumina for Low‐Pressure Ammonia Synthesis. Carbon and Hydrogen, 28(2), 255-268. https://doi.org/10.1002/cbh2.70063

Vancouver

Li X, Wu G, He Y, Li D. Ruthenium‐Based Catalysts Supported on Lanthanum and Carbon‐Modified Alumina for Low‐Pressure Ammonia Synthesis. Carbon and Hydrogen. 2026;28(2):255-268. doi:10.1002/cbh2.70063

BibTeX
@article{Li2026,
  author = {Li, Xiang and Wu, Guandong and He, Yufei and Li, Dianqing},
  title = {Ruthenium‐Based Catalysts Supported on Lanthanum and Carbon‐Modified Alumina for Low‐Pressure Ammonia Synthesis},
  journal = {Carbon and Hydrogen},
  year = {2026},
  volume = {28},
  number = {2},
  pages = {255--268},
  doi = {10.1002/cbh2.70063}
}
Kostenlos starten →