EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

An In‐Situ (Electro)Polymerized Itaconic Acid Coating on LiFePO4 Cathodes for High Performance Lithium‐Ion Batteries

B. Maarten Jager, Jan Franse G. Brakenhoff, Weiqi Liu, Luuk Kortekaas, Moniek Tromp

Battery Energy · 2026-11 · 5 (6)

DOI: 10.1002/bte2.70160 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Battery Energy, online erschienen am 07.11.2026. Verfasst von B. Maarten Jager und 4 weiteren Autor:innen. Die Arbeit nennt 92 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Nederlandse Organisatie voor Wetenschappelijk Onderzoek.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Lithium iron phosphate (LFP) is a sustainable, low‐cost cathode material for lithium‐ion batteries, offering high safety and long cycle life. However, its use in electric vehicles is limited by slow charging (> 1 h) and modest energy density (~400 Wh ), which fall short of high‐power transportation needs. Surface modification is a proven strategy to enhance LFP's conductivity and mitigate surface degradation. Here, we introduce organic itaconic acid (IA) to the cathode to form an in‐situ (electro)polymerized coating. This polymer layer facilitates reversible storage of two per monomer, increasing specific capacity to 227 mAh , surpassing LFP's theoretical limit, while enabling 3C fast charging by reducing interfacial resistance and suppressing side reactions. The modified LFP delivers 99.99% capacity retention, improved interfacial diffusion (2.1 × 10 −14 cm 2 s −1 ), and energy and power densities up to 550 Wh and 1020 W , respectively, offering a highly‐accessible route to next‐generation fast‐charging EV batteries.

Förderung

  • Nederlandse Organisatie voor Wetenschappelijk Onderzoek

Zitieren

APA

Jager, B. M., Brakenhoff, J. F. G., Liu, W., Kortekaas, L., & Tromp, M. (2026). An In‐Situ (Electro)Polymerized Itaconic Acid Coating on LiFePO4 Cathodes for High Performance Lithium‐Ion Batteries. Battery Energy, 5(6). https://doi.org/10.1002/bte2.70160

Vancouver

Jager BM, Brakenhoff JFG, Liu W, Kortekaas L, Tromp M. An In‐Situ (Electro)Polymerized Itaconic Acid Coating on LiFePO4 Cathodes for High Performance Lithium‐Ion Batteries. Battery Energy. 2026;5(6). doi:10.1002/bte2.70160

BibTeX
@article{Jager2026,
  author = {Jager, B. Maarten and Brakenhoff, Jan Franse G. and Liu, Weiqi and Kortekaas, Luuk and Tromp, Moniek},
  title = {An In‐Situ (Electro)Polymerized Itaconic Acid Coating on LiFePO4 Cathodes for High Performance Lithium‐Ion Batteries},
  journal = {Battery Energy},
  year = {2026},
  volume = {5},
  number = {6},
  doi = {10.1002/bte2.70160}
}
Kostenlos starten →