EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Manufacturing‐Driven Programming of Carbon Interfaces via Controlled Densification for Solid‐State Sodium Storage

Fitra Ari Aditya, Fissilmi Zetta Dzakiyah, Muhammad Ilham Rizky Maulana, Evan Cahya Putra, Mutiara Tabitha Kamal, Antonia Anetha Binar Bulan, Maeza Dhenta Purniawan, Sahrul Ramadani, Adam Gilbran, Abbas Ali Iftikhar Hussain, Xiong Wen (David) Lou, Cancio Monteiro

Battery Energy · 2026-07 · 5 (4)

DOI: 10.1002/bte2.70129 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Battery Energy, online erschienen am 03.06.2026. Verfasst von Fitra Ari Aditya und 11 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 95 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Interfacial instability in solid‐state sodium storage is largely dictated by uneven ion flux and localized degradation, while its control through manufacturing parameters remains limited. Here, controlled densification is employed to regulate interfacial structure and sodium‐ion behavior in nitrogen‐doped bio‐derived carbon electrodes. Increasing pressure leads to a transition from porous and discontinuous interfaces to compact and continuous pathways, which moderates ion flux and suppresses local Na⁺ accumulation. Electrochemical impedance measurements show a reduction in interfacial resistance from 320 to 140 Ω, accompanied by restrained resistance evolution during extended cycling. Structural and post‐cycling analyses indicate that this stabilization is associated with more uniform ion redistribution and reduced defect formation at the interface. Nitrogen functionalities further contribute by tuning the interfacial electronic environment, supporting more stable ion transport. The optimized electrodes maintain capacity retention above 90% with consistent rate behavior. These observations reveal a direct link between densification, ion redistribution, and interfacial stability, indicating that ion transport can be regulated through manufacturing‐controlled structural design. This work highlights a practical route for stabilizing solid‐state interfaces through process‐driven control of material architecture.

Zitieren

APA

Aditya, F. A., Dzakiyah, F. Z., Maulana, M. I. R., Putra, E. C., Kamal, M. T., Bulan, A. A. B., Purniawan, M. D., Ramadani, S., Gilbran, A., Hussain, A. A. I., Lou, X. W. D., & Monteiro, C. (2026). Manufacturing‐Driven Programming of Carbon Interfaces via Controlled Densification for Solid‐State Sodium Storage. Battery Energy, 5(4). https://doi.org/10.1002/bte2.70129

Vancouver

Aditya FA, Dzakiyah FZ, Maulana MIR, Putra EC, Kamal MT, Bulan AAB, et al. Manufacturing‐Driven Programming of Carbon Interfaces via Controlled Densification for Solid‐State Sodium Storage. Battery Energy. 2026;5(4). doi:10.1002/bte2.70129

BibTeX
@article{Aditya2026,
  author = {Aditya, Fitra Ari and Dzakiyah, Fissilmi Zetta and Maulana, Muhammad Ilham Rizky and Putra, Evan Cahya and Kamal, Mutiara Tabitha and Bulan, Antonia Anetha Binar and Purniawan, Maeza Dhenta and Ramadani, Sahrul and Gilbran, Adam and Hussain, Abbas Ali Iftikhar and Lou, Xiong Wen (David) and Monteiro, Cancio},
  title = {Manufacturing‐Driven Programming of Carbon Interfaces via Controlled Densification for Solid‐State Sodium Storage},
  journal = {Battery Energy},
  year = {2026},
  volume = {5},
  number = {4},
  doi = {10.1002/bte2.70129}
}
Kostenlos starten →