EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

NiCo alloy‐anchored self‐supporting carbon foam as a bifunctional oxygen electrode for rechargeable and flexible Zn–air batteries

Mengyang Dong, Huai Qin Fu, Yiming Xu, Yu Zou, Ziyao Chen, Liang Wang, Mengqing Hu, Kaidi Zhang, Bo Fu, Huajie Yin, Porun Liu, Huijun Zhao

Battery Energy · 2023-07 · 2 (4)

DOI: 10.1002/bte2.20220063 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Battery Energy, online erschienen am 22.05.2023. Verfasst von Mengyang Dong und 11 weiteren Autor:innen. Die Arbeit wurde bisher 29-mal zitiert (Crossref) und nennt 42 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Australian Research Council.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The design and fabrication of flexible, porous, conductive electrodes with customizable functions become the prime challenge in the development of new‐generation wearable electronics, especially for rechargeable batteries. Here, the NiCo bialloy particulate catalyst‐loaded self‐supporting carbon foam framework (NiCo@SCF) as a flexible electrode has been fabricated through one facile adsorption‐pyrolysis method using a commercial melamine foam. Compared with the electrode with Pt/C and Ir/C benchmark catalysts, the NiCo@SCF electrode exhibited superior bifunctional electrocatalytic performance in alkaline media with a half‐wave potential of 0.906 V for oxygen reduction reaction, an overpotential of 286 mV at j = 10 mA cm −2 for oxygen evolution reaction, and stable bifunctional performance with a small degradation after 20,000 voltammetric cycles. The as‐assembled aqueous zinc–air battery (ZAB) with NiCo@SCF as a self‐supporting air cathode demonstrated a high peak power density of 178.6 mW cm −2 at a current density of 10 mA cm −2 and a stable voltage gap of 0.94 V over a 540 h charge−discharge operation. Remarkably, the as‐assembled flexible solid‐state ZAB with self‐supporting NiCo@SCF as the air cathode presented an engaging peak power density of 80.1 mW cm −2 and excellent durability of 95 h undisrupted operation, showing promise for the design of wearable ZAB. The demonstrated electrode fabrication approach exemplifies a facile, large‐scale avenue toward functional electrodes, potentially extendable to other wearable electronics for broader applications.

Förderung

  • Australian Research Council

Zitieren

APA

Dong, M., Fu, H. Q., Xu, Y., Zou, Y., Chen, Z., Wang, L., Hu, M., Zhang, K., Fu, B., Yin, H., Liu, P., & Zhao, H. (2023). NiCo alloy‐anchored self‐supporting carbon foam as a bifunctional oxygen electrode for rechargeable and flexible Zn–air batteries. Battery Energy, 2(4). https://doi.org/10.1002/bte2.20220063

Vancouver

Dong M, Fu HQ, Xu Y, Zou Y, Chen Z, Wang L, et al. NiCo alloy‐anchored self‐supporting carbon foam as a bifunctional oxygen electrode for rechargeable and flexible Zn–air batteries. Battery Energy. 2023;2(4). doi:10.1002/bte2.20220063

BibTeX
@article{Dong2023,
  author = {Dong, Mengyang and Fu, Huai Qin and Xu, Yiming and Zou, Yu and Chen, Ziyao and Wang, Liang and Hu, Mengqing and Zhang, Kaidi and Fu, Bo and Yin, Huajie and Liu, Porun and Zhao, Huijun},
  title = {NiCo alloy‐anchored self‐supporting carbon foam as a bifunctional oxygen electrode for rechargeable and flexible Zn–air batteries},
  journal = {Battery Energy},
  year = {2023},
  volume = {2},
  number = {4},
  doi = {10.1002/bte2.20220063}
}
Kostenlos starten →