EUVIMEDEUVIMED entdecken
Crossref

Development of a Stability‐Indicating HPLC Method for Quantification of Belzutifan and Its Related Impurities With LC–MS/MS Characterization of Degradation Products

Pydi Simhachalam, Thatituri Sabithakala iD

Biomedical Chromatography · 2026

DOI: 10.1002/bmc.70333 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Biomedical Chromatography, 2026. Verfasst von Pydi Simhachalam und 1 weiteren Autor:innen. Beteiligte Einrichtung: University College of Engineering, Science and Technology, Jawaharlal Nehru Technological University, Hyderabad, Telangana, India. Hauptthemen laut MEDLINE: Tandem Mass Spectrometry. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 30 Literaturangaben.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

A stability‐indicating HPLC method was developed to quantify belzutifan and its related and degradation impurities, and LC–MS/MS technology was used for the characterization of stress‐induced degradation products (DPs). Adequate separation was attained on an waters X Bridge C18 column with dimensions 150 × 4.6 mm (3.5 μm) at 30°C, utilizing acetonitrile and 0.1% formic acid in water (60:40) v/v as the mobile phase. This method was set at a flow rate of 0.8 mL/min, and a PDA detector was used for detection. The method demonstrated excellent specificity, accuracy (98.24%–101.01% recovery), precision (%RSD < 2), linearity ( R 2 > 0.999), and sensitivity, with resolution > 2.0. Forced degradation studies showed no degradation under UV and thermal stress but significant degradation under acidic, basic, and oxidative conditions, yielding two acid‐induced (DP A/B‐1 and A‐2), one base‐induced (DP A/B‐1), and one peroxide‐induced (DP O‐1) DPs. The degradation pathways of DPS were established by using the mass fragmentation patterns. This method represents stability, is compliant with ICH guidelines, and is well suited for routine quality control and comprehensive stability assessment of belzutifan. A representation of the stress study of belzutifan is shown.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

Tandem Mass SpectrometryChromatography, High Pressure LiquidDrug StabilityReproducibility of ResultsLinear ModelsLimit of DetectionDrug ContaminationSensitivity and SpecificityLiquid Chromatography-Mass SpectrometryIndenes

Stichwörter der Autor:innen

LC–MS/MSbelzutifandegradationstability indicatingvalidation

Substanzen

belzutifanIndenes

Autor:innen und Institutionen

  • University College of Engineering, Science and Technology, Jawaharlal Nehru Technological University, Hyderabad, Telangana, India.

ORCID-Profile: Thatituri Sabithakala

Zitieren

APA

Simhachalam, P., & Sabithakala, T. (2026). Development of a Stability‐Indicating HPLC Method for Quantification of Belzutifan and Its Related Impurities With LC–MS/MS Characterization of Degradation Products. Biomedical Chromatography. https://doi.org/10.1002/bmc.70333

Vancouver

Simhachalam P, Sabithakala T. Development of a Stability‐Indicating HPLC Method for Quantification of Belzutifan and Its Related Impurities With LC–MS/MS Characterization of Degradation Products. Biomedical Chromatography. 2026. doi:10.1002/bmc.70333

BibTeX
@article{Simhachalam2026,
  author = {Simhachalam, Pydi and Sabithakala, Thatituri},
  title = {Development of a Stability‐Indicating HPLC Method for Quantification of Belzutifan and Its Related Impurities With LC–MS/MS Characterization of Degradation Products},
  journal = {Biomedical Chromatography},
  year = {2026},
  doi = {10.1002/bmc.70333}
}
Kostenlos starten →