Modeling and Optimization of Recombinant Tocilizumab Production From Pichia pastoris Using Response Surface Methodology and Artificial Neural Network
Biotechnology and Bioengineering · 2025-08 · 122 (8) · 2093-2110
DOI: 10.1002/bit.29024 ↗Kurz gefasst
Fachartikel in der Zeitschrift Biotechnology and Bioengineering, online erschienen am 15.05.2025. Verfasst von Prabir Kumar Das und 2 weiteren Autor:innen. Beteiligte Einrichtung: Biochemical Engineering Laboratory, Department of Biosciences and Bioengineering, Indian Institute of Technology Guwahati, Guwahati, Assam, India. Hauptthemen laut MEDLINE: Neural Networks, Computer, Antibodies, Monoclonal, Humanized, Saccharomycetales, Pichia. Die Arbeit wurde bisher 9-mal zitiert (Crossref) und nennt 41 Literaturangaben. Gefördert von: This research was supported by the Indian Council of Medical Research., Indian Council of Medical Research.
Abstract (Originalsprache)
This study has demonstrated the optimization of the defined medium that significantly enhanced the production of recombinant monoclonal antibody (mAb) Tocilizumab (TCZ) as full‐length and Fab fragment from Pichia pastoris . Out of the four tested defined media, FM22 was found to be suitable for the growth of recombinant strains and antibody yield. Among the various carbon and nitrogen sources tested, mannitol and glycine, respectively, were found to be suitable for the enhanced production of full‐length TCZ. Similarly, sorbitol and ammonium sulfate were found to be suitable carbon and nitrogen sources, respectively, for enhanced production of Fab. The medium components that significantly influenced the production of TCZ were found to be mannitol, glycine, histidine, and K 2 SO 4 and sorbitol, ammonium sulfate, KH 2 PO 4 , and CaSO 4 .2H 2 O for full‐length and Fab, respectively, using a two‐level factorial Plackett‐Burman design. The screened medium components were optimized using response surface methodology (Box‐Behnken Design). Artificial neural network (ANN) models combined with genetic algorithms (GA) further improved predictions and showed a remarkable impact on mAb production in P. pastoris . Under the optimal levels of medium components, the full‐length TCZ and Fab were determined to be 0.35 mg/L and 0.42 g/L, respectively, in the shake‐flask culture. The yield of full‐length TCZ and Fab in batch reactor (2‐L culture) was found to be 0.44 mg/L and 0.45 g/L, respectively, at the optimal levels of the medium components. The overall increased yields were observed to be 3.8 and 2.9‐folds of full‐length TCZ and Fab, respectively.
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Stichwörter der Autor:innen
Substanzen
Autor:innen und Institutionen
- Biochemical Engineering Laboratory, Department of Biosciences and Bioengineering, Indian Institute of Technology Guwahati, Guwahati, Assam, India.
ORCID-Profile: Venkata Dasu Veeranki
Förderung
- This research was supported by the Indian Council of Medical Research.
- Indian Council of Medical Research
Zitieren
APA
Das, P. K., Sahoo, A., & Veeranki, V. D. (2025). Modeling and Optimization of Recombinant Tocilizumab Production From Pichia pastoris Using Response Surface Methodology and Artificial Neural Network. Biotechnology and Bioengineering, 122(8), 2093-2110. https://doi.org/10.1002/bit.29024
Vancouver
Das PK, Sahoo A, Veeranki VD. Modeling and Optimization of Recombinant Tocilizumab Production From Pichia pastoris Using Response Surface Methodology and Artificial Neural Network. Biotechnology and Bioengineering. 2025;122(8):2093-2110. doi:10.1002/bit.29024
BibTeX
@article{Das2025,
author = {Das, Prabir Kumar and Sahoo, Ansuman and Veeranki, Venkata Dasu},
title = {Modeling and Optimization of Recombinant Tocilizumab Production From Pichia pastoris Using Response Surface Methodology and Artificial Neural Network},
journal = {Biotechnology and Bioengineering},
year = {2025},
volume = {122},
number = {8},
pages = {2093--2110},
doi = {10.1002/bit.29024}
}
EUVIMED