EUVIMEDEUVIMED entdecken
Crossref

Ascidians as a Sustainable Source of Cellulose: Physicochemical Characterization, Degradability, and Relevance for Bioplastic Applications

Lizbeth Zamora-Mendoza, Yuliana J Valdiviezo-Cuenca, Gabriela Agurto-Rodríguez iD, Paúl O Guillén, Floralba López, Lady V Guanoliquin, Cesar Zambrano, Camilo Zamora-Ledezma, Jenny Rodríguez, Gabriel Gómez-Guerra, Frank Alexis iD

Biopolymers · 2026

DOI: 10.1002/bip.70099 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Biopolymers, 2026. Verfasst von Lizbeth Zamora-Mendoza und 10 weiteren Autor:innen. Beteiligte Einrichtung: Department of Chemical Engineering, Universidad San Francisco de Quito (USFQ), Quito, Ecuador. Hauptthemen laut MEDLINE: Cellulose, Urochordata, Biodegradable Plastics. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 45 Literaturangaben. Gefördert von: CENAIM, Colegio de Ciencias e Ingenierías-USFQ.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Cellulose derived from ascidians (tunicates) is distinguished from plant‐based counterparts by its marine origin, with high crystallinity, and complex hierarchical architecture. However, quantitative structure–property relationships governing its performance in bioplastic applications remain underexplored. Here, cellulose isolated from three ascidian species Ascidia sp. (T1), Herdmania cf. pallida (T2), and Ascidia sydneiensis (T3) was systematically characterized. X‐ray diffraction reveals crystallinity indices (CrI) of 48% (T1) and 60% (T2, T3), the latter approaching values reported for highly ordered systems such as bacterial cellulose. Thermogravimetric analysis demonstrates species‐dependent thermal stability, with maximum degradation temperatures of 345°C (T1) versus 400°C–401°C (T2, T3). Notably, T2 and T3 exhibit thermal behavior comparable to microcrystalline and bacterial cellulose, despite CrI values lower than those systems, indicating that hydrogen‐bonding density and microfibrillar order govern thermal resilience. Scanning electron microscopy reveals distinct microfibrillar architectures, ranging from highly branched networks to compact laminar structures, which govern water interaction and mechanical response. Water absorption varies markedly by species: T1 and T3 absorb 2200–2400 wt% within 10 min, consistent with their branched, open fibrillar morphologies, whereas T2 absorbs only 1200 wt%, reflecting a compact lamellar microstructure that restricts water diffusion. Hydrolytic degradation after 28 days in neutral water remains minimal across all samples, confirming exceptional resistance to hydrolytic scission under mild conditions. Bioplastics fabricated from these celluloses exhibit tensile strengths of 1–4 MPa, directly correlating with microstructural packing. Collectively, these results establish that ascidian cellulose is the combination of thermal stability up to 400°C, tunable water affinity (1200–2400% absorption), and hydrolytic resistance (1–9% loss over 28 days) arises from species‐specific interactions between crystallinity, hydrogen bonding, and microfibrillar architecture. This positions ascidian‐derived cellulose as a distinct marine macromolecular scaffold for sustainable bioplastics where controlled water interaction and structural durability are required. In general, it is established the relationship between the biological origin, hierarchical structure, and macroscopic properties of tunicate cellulose, highlighting its potential as a marine‐derived macromolecular building block suitable for sustainable bioplastics applications.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

CelluloseUrochordataBiodegradable PlasticsAnimalsX-Ray DiffractionThermogravimetryTemperatureWater

Stichwörter der Autor:innen

bioplasticcellulosemarine biodiversitynatural productstunicates

Substanzen

CelluloseBiodegradable PlasticsWater

Autor:innen und Institutionen

  • Department of Chemical Engineering, Universidad San Francisco de Quito (USFQ), Quito, Ecuador.
  • Escuela Superior Politécnica del Litoral, ESPOL, Guayaquil, Ecuador.
  • Centro Nacional de Acuicultura e Investigaciones Marinas (CENAIM), Escuela Superior Politécnica del Litoral (ESPOL), Guayaquil, Ecuador.
  • Facultad de Ciencias Naturales y Matemáticas, Escuela Superior Politécnica del Litoral, ESPOL, Guayaquil, Ecuador.
  • CATS Research Group, School of Chemical Sciences and Engineering, Yachay Tech University, Ibarra, Ecuador.
  • Bioengineering & Regenerative Medicine Research Group (Bio-ReM), Escuela de Ingeniería, Arquitectura y Diseño (EIAD), Universidad Alfonso X el Sabio (UAX), Villanueva de la Cañada, Madrid, Spain.

ORCID-Profile: Gabriela Agurto-Rodríguez, Frank Alexis

Förderung

  • CENAIM
  • Colegio de Ciencias e Ingenierías-USFQ

Zitieren

APA

Zamora-Mendoza, L., Valdiviezo-Cuenca, Y. J., Agurto-Rodríguez, G., Guillén, P. O., López, F., Guanoliquin, L. V., Zambrano, C., Zamora-Ledezma, C., Rodríguez, J., Gómez-Guerra, G., & Alexis, F. (2026). Ascidians as a Sustainable Source of Cellulose: Physicochemical Characterization, Degradability, and Relevance for Bioplastic Applications. Biopolymers. https://doi.org/10.1002/bip.70099

Vancouver

Zamora-Mendoza L, Valdiviezo-Cuenca YJ, Agurto-Rodríguez G, Guillén PO, López F, Guanoliquin LV, et al. Ascidians as a Sustainable Source of Cellulose: Physicochemical Characterization, Degradability, and Relevance for Bioplastic Applications. Biopolymers. 2026. doi:10.1002/bip.70099

BibTeX
@article{ZamoraMendoza2026,
  author = {Zamora-Mendoza, Lizbeth and Valdiviezo-Cuenca, Yuliana J and Agurto-Rodríguez, Gabriela and Guillén, Paúl O and López, Floralba and Guanoliquin, Lady V and Zambrano, Cesar and Zamora-Ledezma, Camilo and Rodríguez, Jenny and Gómez-Guerra, Gabriel and Alexis, Frank},
  title = {Ascidians as a Sustainable Source of Cellulose: Physicochemical Characterization, Degradability, and Relevance for Bioplastic Applications},
  journal = {Biopolymers},
  year = {2026},
  doi = {10.1002/bip.70099}
}
Kostenlos starten →