Development and Characterization of Starch‐Based Chitosan Reinforced Composite for Food Packaging Application
Biopolymers · 2025
DOI: 10.1002/bip.70009 ↗Kurz gefasst
Fachartikel in der Zeitschrift Biopolymers, 2025. Verfasst von Funmilayo Deborah Adewumi und 7 weiteren Autor:innen. Beteiligte Einrichtung: Department of Chemical Sciences, Afe Babalola University, Ado-Ekiti, Nigeria. Hauptthemen laut MEDLINE: Chitosan, Starch, Food Packaging. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 102 Literaturangaben.
Abstract (Originalsprache)
This study considers the development of composite from biodegradable bioplastic obtained from waste starch reinforced with chitosan obtained from snail shells. About 30 g of the starch, 8 mL of glycerol, 2 mL of olive oil, and 8 mL of vinegar were added without chitosan and made up to 150 mL with distilled water. For other samples, 0.5, 1, 2, and 4 g of chitosan were added as reinforcements. The solution was thoroughly mixed, then heated to a temperature of 70°C and stirred continuously till it started to gel, after which it was dried for 3 days. The developed composite was evaluated via physical, mechanical, and structural analyses. The results indicated that the sample with 0.5 g of chitosan reinforcement outperformed others with or without chitosan reinforcement, showing evidence of low water content, solubility, absorption, high tensile strength, and Young's modulus. The Fourier transform infrared (FTIR) spectroscopy results revealed that the chitosan amino group chemically reacted with the starch hydroxyl group, and a bio‐blend was formed. From the scanning electron microscopy (SEM) test, the morphology of the composite surface showed homogeneity with no visible agglomerates, while the x‐ray diffraction (XRD) results showed a sharp peak at 2 θ of 29°. In addition, the thermogravimetric analysis (TGA) shows that the thermoplastic starch with 0.5 g of chitosan has the highest thermal stability at 750°C, leaving 19.63% residue. This study is significant as it enhances the application of bioplastics, encourages waste‐to‐wealth conversion, reduces waste generation, and promotes environmental sustainability.
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Stichwörter der Autor:innen
Substanzen
Autor:innen und Institutionen
- Department of Chemical Sciences, Afe Babalola University, Ado-Ekiti, Nigeria.
- Department of Mechatronics Engineering, Bells University of Technology, Ota, Nigeria.
- Department of Biotechnology, Baze University, Abuja, Nigeria.
- Department of Mathematical and Physical Sciences, Afe Babalola University, Ado-Ekiti, Nigeria.
ORCID-Profile: Ilesanmi Daniyan
Zitieren
APA
Adewumi, F. D., Daniyan, I., Danjuma, S., Ogundolie, F. A., Ogunmodede, O., David, P., Fred-Hamadu, O. H., & Adigun, A. (2025). Development and Characterization of Starch‐Based Chitosan Reinforced Composite for Food Packaging Application. Biopolymers. https://doi.org/10.1002/bip.70009
Vancouver
Adewumi FD, Daniyan I, Danjuma S, Ogundolie FA, Ogunmodede O, David P, et al. Development and Characterization of Starch‐Based Chitosan Reinforced Composite for Food Packaging Application. Biopolymers. 2025. doi:10.1002/bip.70009
BibTeX
@article{Adewumi2025,
author = {Adewumi, Funmilayo Deborah and Daniyan, Ilesanmi and Danjuma, Solomon and Ogundolie, Frank Abimbola and Ogunmodede, Oluwafemi and David, Peter and Fred-Hamadu, Omowunmi Hannah and Adigun, Abimbola},
title = {Development and Characterization of Starch‐Based Chitosan Reinforced Composite for Food Packaging Application},
journal = {Biopolymers},
year = {2025},
doi = {10.1002/bip.70009}
}
EUVIMED