EUVIMEDEUVIMED entdecken
Crossref

Influence of kepok banana bunch as new cellulose source on thermal, mechanical, and biodegradability properties of Thai cassava starch/polyvinyl alcohol hybrid‐based bioplastic

Nelga Autha, Febriana Esza Dewi Siregar, Harmiansyah, Melbi Mahardika iD, Eka Nurfani

Biopolymers · 2023

DOI: 10.1002/bip.23560 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Biopolymers, 2023. Verfasst von Nelga Autha und 4 weiteren Autor:innen. Beteiligte Einrichtung: Biosystems Engineering, Institut Teknologi Sumatera, Lampung, Indonesia. Hauptthemen laut MEDLINE: Manihot, Musa. Die Arbeit wurde bisher 7-mal zitiert (Crossref) und nennt 38 Literaturangaben. Gefördert von: Penelitian Dasar Kompetitif Nasional from the Ministry of Education, Culture, Research, and Technology of the Republic of Indonesia.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Bioplastics were developed to overcome environmental problems that are difficult to decompose in the environment. This study analyzes Thai cassava starch‐based bioplastics' tensile strength, biodegradability, moisture absorption, and thermal stability. This study used Thai cassava starch and polyvinyl alcohol (PVA) as matrices, whereas Kepok banana bunch cellulose was employed as a filler. The ratios between starch and cellulose are 10:0 (S1), 9:1 (S2), 8:2 (S3), 7:3 (S4), and 6:4 (S5), while PVA was set constant. The tensile test showed the S4 sample's highest tensile strength of 6.26 MPa, a strain of 3.85%, and a modulus of elasticity of 166 MPa. After 15 days, the maximum soil degradation rate in the S1 sample was 27.9%. The lowest moisture absorption was found in the S5 sample at 8.43%. The highest thermal stability was observed in S4 (316.8°C). This result was significant in reducing the production of plastic waste for environmental remediation.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

ManihotMusaCellulosePolyvinyl AlcoholStarchTensile Strength

Stichwörter der Autor:innen

Kepok banana bunch cellulosePVAThai cassava starchbiodegradabilitybioplastics

Substanzen

CellulosePolyvinyl AlcoholStarch

Autor:innen und Institutionen

  • Biosystems Engineering, Institut Teknologi Sumatera, Lampung, Indonesia.
  • Research Center for Biomass and Bioproducts, National Research and Innovation Agency (BRIN), Cibinong, Indonesia.
  • Research Collaboration Center for Nanocellulose, BRIN-Andalas University, Padang, Indonesia.
  • Materials Engineering, Institut Teknologi Sumatera, Lampung, Indonesia.

ORCID-Profile: Melbi Mahardika

Förderung

  • Penelitian Dasar Kompetitif Nasional from the Ministry of Education, Culture, Research, and Technology of the Republic of Indonesia

Zitieren

APA

Autha, N., Siregar, F. E. D., Harmiansyah, Mahardika, M., & Nurfani, E. (2023). Influence of kepok banana bunch as new cellulose source on thermal, mechanical, and biodegradability properties of Thai cassava starch/polyvinyl alcohol hybrid‐based bioplastic. Biopolymers. https://doi.org/10.1002/bip.23560

Vancouver

Autha N, Siregar FED, Harmiansyah, Mahardika M, Nurfani E. Influence of kepok banana bunch as new cellulose source on thermal, mechanical, and biodegradability properties of Thai cassava starch/polyvinyl alcohol hybrid‐based bioplastic. Biopolymers. 2023. doi:10.1002/bip.23560

BibTeX
@article{Autha2023,
  author = {Autha, Nelga and Siregar, Febriana Esza Dewi and Harmiansyah and Mahardika, Melbi and Nurfani, Eka},
  title = {Influence of kepok banana bunch as new cellulose source on thermal, mechanical, and biodegradability properties of Thai cassava starch/polyvinyl alcohol hybrid‐based bioplastic},
  journal = {Biopolymers},
  year = {2023},
  doi = {10.1002/bip.23560}
}
Kostenlos starten →