Depolymerization of the polyester–polyurethane by amidase GatA250 and enhancing the production of 4,4′‐methylenedianiline with cutinase LCC
Biotechnology Journal · 2024
DOI: 10.1002/biot.202300723 ↗Kurz gefasst
Fachartikel in der Zeitschrift Biotechnology Journal, 2024. Verfasst von Kaiyuan Xin und 7 weiteren Autor:innen. Beteiligte Einrichtung: Key Laboratory for Waste Plastics Biocatalytic Degradation and Recycling, College of Biotechnology and Pharmaceutical Engineering, Nanjing Tech Unive…. Hauptthemen laut MEDLINE: Polyurethanes, Polyesters, Aniline Compounds, Carboxylic Ester Hydrolases. Die Arbeit wurde bisher 25-mal zitiert (Crossref) und nennt 35 Literaturangaben.
Abstract (Originalsprache)
Polyurethane (PU) is a complex polymer synthesized from polyols and isocyanates. It contains urethane bonds that resist hydrolysis, which decreases the efficiency of biodegradation. In this study, we first expressed the amidase GatA250, and then, assessed the enzymatic characterization of GatA250 and its efficiency in degrading the polyester‐PU. GatA250 degraded self‐synthesized thermoplastic PU film and postconsumption foam with degradation efficiency of 8.17% and 4.29%, respectively. During the degradation, the film released 14.8 µ m 4,4′‐methylenedianiline (MDA), but 1,4‐butanediol (BDO) and adipic acid (AA) were not released. Our findings indicated that GatA250 only cleaved urethane bonds in PU, and the degradation efficiency was extremely low. Hence, we introduced the cutinase LCC, which possesses hydrolytic activity on the ester bonds in PU, and then used both enzymes simultaneously to degrade the polyester‐PU. The combined system (LCC‐GatA250) had higher degradation efficiency for the degradation of PU film (42.2%) and foam (13.94%). The combined system also showed a 1.80 time increase in the production of the monomer MDA, and a 1.23 and 3.62 times increase in the production of AA and BDO, respectively, compared to their production recorded after treatment with only GatA250 or LCC. This study provides valuable insights into PU pollution control and also proposes applicable solutions to manage PU wastes through bio‐recycling.
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Stichwörter der Autor:innen
Substanzen
Autor:innen und Institutionen
- Key Laboratory for Waste Plastics Biocatalytic Degradation and Recycling, College of Biotechnology and Pharmaceutical Engineering, Nanjing Tech University, Nanjing, P.R. China.
- Jiangsu National Synergetic Innovation Center, for Advanced Materials (SICAM), Nanjing Tech University, Nanjing, P.R. China.
- State Key Laboratory of Materials-Oriented Chemical Engineering, Nanjing Tech University, Nanjing, P.R. China.
ORCID-Profile: Weiliang Dong, Min Jiang
Zitieren
APA
Xin, K., Lu, J., Zeng, Q., Zhang, T., Liu, J., Zhou, J., Dong, W., & Jiang, M. (2024). Depolymerization of the polyester–polyurethane by amidase GatA250 and enhancing the production of 4,4′‐methylenedianiline with cutinase LCC. Biotechnology Journal. https://doi.org/10.1002/biot.202300723
Vancouver
Xin K, Lu J, Zeng Q, Zhang T, Liu J, Zhou J, et al. Depolymerization of the polyester–polyurethane by amidase GatA250 and enhancing the production of 4,4′‐methylenedianiline with cutinase LCC. Biotechnology Journal. 2024. doi:10.1002/biot.202300723
BibTeX
@article{Xin2024,
author = {Xin, Kaiyuan and Lu, Jianqi and Zeng, Qingyi and Zhang, Tianyang and Liu, Jiawei and Zhou, Jie and Dong, Weiliang and Jiang, Min},
title = {Depolymerization of the polyester–polyurethane by amidase GatA250 and enhancing the production of 4,4′‐methylenedianiline with cutinase LCC},
journal = {Biotechnology Journal},
year = {2024},
doi = {10.1002/biot.202300723}
}
EUVIMED