EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

CFD evaluation of hydrophobic feedstock bench‐scale fermenters for efficient high agitation volumetric mass transfer

Richard Marx iD, Huolong Liu, Seongkyu Yoon iD, Dongming Xie iD

Biotechnology Journal · 2024

DOI: 10.1002/biot.202300384 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Biotechnology Journal, 2024. Verfasst von Richard Marx und 3 weiteren Autor:innen. Beteiligte Einrichtung: Department of Chemical Engineering, University of Massachusetts Lowell, Lowell, Massachusetts, USA. Hauptthemen laut MEDLINE: Bioreactors, Hydrodynamics. Die Arbeit wurde bisher 9-mal zitiert (Crossref) und nennt 62 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

A new biomanufacturing platform combining intracellular metabolic engineering of the oleaginous yeast Yarrowia lipolytica and extracellular bioreaction engineering provides efficient bioconversion of plant oils/animal fats into high‐value products. However, predicting the hydrodynamics and mass transfer parameters is difficult due to the high agitation and sparging required to create dispersed oil droplets in an aqueous medium for efficient yeast fermentation. In the current study, commercial computational fluid dynamic (CFD) solver Ansys CFX coupled with the MUSIG model first predicts two‐phase system (oil/water and air/water) mixing dynamics and their particle size distributions. Then, a three‐phase model (oil, air, and water) utilizing dispersed air bubbles and a polydispersed oil phase was implemented to explore fermenter mixing, gas dispersion efficiency, and volumetric mass transfer coefficient estimations ( k L a ). The study analyzed the effect of the impeller type, agitation speed, and power input on the tank's flow field and revealed that upward‐pumping pitched blade impellers (PBI) in the top two positions (compared to Rushton‐type) provided advantageous oil phase homogeneity and similar estimated k L a values with reduced power. These results show good agreement with the experimental mixing and k L a data.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

BioreactorsHydrodynamicsAnimalsFermentation

Stichwörter der Autor:innen

CFDPBMhydrophobic feedstockmultiphase flowstirred-tank bioreactor

Autor:innen und Institutionen

  • Department of Chemical Engineering, University of Massachusetts Lowell, Lowell, Massachusetts, USA.

ORCID-Profile: Richard Marx, Seongkyu Yoon, Dongming Xie

Zitieren

APA

Marx, R., Liu, H., Yoon, S., & Xie, D. (2024). CFD evaluation of hydrophobic feedstock bench‐scale fermenters for efficient high agitation volumetric mass transfer. Biotechnology Journal. https://doi.org/10.1002/biot.202300384

Vancouver

Marx R, Liu H, Yoon S, Xie D. CFD evaluation of hydrophobic feedstock bench‐scale fermenters for efficient high agitation volumetric mass transfer. Biotechnology Journal. 2024. doi:10.1002/biot.202300384

BibTeX
@article{Marx2024,
  author = {Marx, Richard and Liu, Huolong and Yoon, Seongkyu and Xie, Dongming},
  title = {CFD evaluation of hydrophobic feedstock bench‐scale fermenters for efficient high agitation volumetric mass transfer},
  journal = {Biotechnology Journal},
  year = {2024},
  doi = {10.1002/biot.202300384}
}
Kostenlos starten →