Enhanced Power Conversion Efficiency in Lead‐Free CH 3 NH 3 SnI 3 ‐Based Perovskite Solar Cell Using SCAPS Simulation
Luminescence · 2026-11 · 41 (11)
DOI: 10.1002/bio.70683 ↗Kurz gefasst
Fachartikel in der Zeitschrift Luminescence, online erschienen am 18.11.2026. Verfasst von Vaibhava Srivastava. Beteiligte Einrichtung: Department of Electronics Engineering, Harcourt Butler Technical University, Kanpur, Uttar Pradesh, India. Hauptthemen laut MEDLINE: Solar Energy, Titanium, Oxides, Calcium Compounds. Die Arbeit nennt 48 Literaturangaben.
Abstract (Originalsprache)
Perovskite‐based solar cells (PSCs) have emerged as the fastest‐growing photovoltaic technology in recent years. While lead (Pb)‐based PSCs currently deliver the highest efficiencies, their inherent toxicity poses significant environmental and health concerns. To address this, Pb‐free perovskite materials have been explored. This study focuses on a Pb‐free PSC architecture consisting of FTO/GO/CH 3 NH 3 SnI 3 /CZTS/C. In this design, fluorine‐doped tin oxide (FTO) serves as transparent conductive window layer, graphene oxide (GO) functions as electron transport layer (ETL), copper zinc tin sulfide (CZTS) acts as hole transport layer (HTL), and carbon is employed as the back contact. The device is modelled using Solar Cell Capacitance Simulator (SCAPS‐1D), with variations applied to the thicknesses, defect density, bandgap of absorber (CH 3 NH 3 SnI 3 ) layer, work function of back contact and series & shunt resistance, as well as to operating temperature range (300K–480K). Optimal performance is obtained with an absorber acceptor density of 10 15 cm −3 , HTL acceptor density of 10 18 cm −3 , and ETL donor density of 10 19 cm −3 . Increasing defect density ( N t ) is found to degrade device efficiency. The maximum power conversion efficiency (PCE) of 31.27% with an open‐circuit voltage ( V oc ) of 1.0741 V, short‐circuit current density ( J sc ) of 35.28 mA/cm 2 , and a fill factor (FF) of 82.51%.
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Stichwörter der Autor:innen
Substanzen
Autor:innen und Institutionen
- Department of Electronics Engineering, Harcourt Butler Technical University, Kanpur, Uttar Pradesh, India.
ORCID-Profile: Vaibhava Srivastava
Zitieren
APA
Srivastava, V. (2026). Enhanced Power Conversion Efficiency in Lead‐Free CH 3 NH 3 SnI 3 ‐Based Perovskite Solar Cell Using SCAPS Simulation. Luminescence, 41(11). https://doi.org/10.1002/bio.70683
Vancouver
Srivastava V. Enhanced Power Conversion Efficiency in Lead‐Free CH 3 NH 3 SnI 3 ‐Based Perovskite Solar Cell Using SCAPS Simulation. Luminescence. 2026;41(11). doi:10.1002/bio.70683
BibTeX
@article{Srivastava2026,
author = {Srivastava, Vaibhava},
title = {Enhanced Power Conversion Efficiency in Lead‐Free CH 3 NH 3 SnI 3 ‐Based Perovskite Solar Cell Using SCAPS Simulation},
journal = {Luminescence},
year = {2026},
volume = {41},
number = {11},
doi = {10.1002/bio.70683}
}
EUVIMED