EUVIMEDEUVIMED entdecken
Crossref

Structural, optical, and luminescence properties of Dy 3+ ‐activated potassium calcium silicate phosphor for white light‐emitting diodes

Vibha Sharma, Shreya Maurya, Anu iD, Aman Prasad iD, Allam Srinivasa Rao iD

Luminescence · 2023

DOI: 10.1002/bio.4544 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Luminescence, 2023. Verfasst von Vibha Sharma und 4 weiteren Autor:innen. Beteiligte Einrichtung: Department of Applied Physics, Delhi Technological University, New Delhi, India. Hauptthemen laut MEDLINE: Luminescence, Luminescent Agents. Die Arbeit wurde bisher 8-mal zitiert (Crossref) und nennt 42 Literaturangaben. Gefördert von: Council of Scientific and Industrial Research-University Grants Commission (CSIR-UGC), Government of India.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

A dysprosium (Dy 3+ )‐activated potassium calcium silicate (K 4 CaSi 3 O 9 ) phosphor was prepared using a solid‐state synthesis route. The phosphor had a cubic structure with the space group Pa as confirmed using X‐ray diffraction (XRD) measurements. Details of surface morphology and elemental composition of the as‐synthesized undoped KCS phosphor was obtained using scanning electron microscopy (SEM) and energy‐dispersive X‐ray (EDX) spectroscopy. The chemical structure as well as the vibrational modes present in the as‐prepared KCS phosphor was analyzed using Fourier transform infrared (FT‐IR) spectroscopy. Diffuse reflectance spectra (DRS) were used to determine the optical bandgap of the phosphors and were found to be in the optical range 3.52–3.71 eV. Photoluminescence (PL) spectra showed intense yellow emission corresponding to the 4 F 9/2 → 6 H 13/2 transition under 350 nm excitation. Commission International de l′Eclairage colour chromaticity coordinates were evaluated using the PL spectral data lie within the white region. Dexter theory and the Inokuti–Hirayama (I–H) model were applied to study the nature of the energy transfer mechanism in the as‐prepared phosphors. The relatively high activation energy of the phosphors was evaluated using temperature‐dependent PL (TDPL) data and confirmed the high thermal stability of the titled phosphor. The abovementioned results indicated that the as‐prepared KCS:Dy 3+ phosphor was a promising candidate for n‐UV‐based white light‐emitting diodes.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

LuminescenceLuminescent AgentsSpectroscopy, Fourier Transform InfraredCalcium CompoundsSilicates

Stichwörter der Autor:innen

I-H modelactivation energyluminescencephosphorw-LEDs

Substanzen

Luminescent AgentsCalcium Compoundscalcium silicateSilicates

Autor:innen und Institutionen

  • Department of Applied Physics, Delhi Technological University, New Delhi, India.
  • Department of Physics and Computer Science, Dayalbagh Educational Institute (DEI), Deemed University, Agra, India.

ORCID-Profile: Anu, Aman Prasad, Allam Srinivasa Rao

Förderung

  • Council of Scientific and Industrial Research-University Grants Commission (CSIR-UGC), Government of India

Zitieren

APA

Sharma, V., Maurya, S., Anu, Prasad, A., & Rao, A. S. (2023). Structural, optical, and luminescence properties of Dy 3+ ‐activated potassium calcium silicate phosphor for white light‐emitting diodes. Luminescence. https://doi.org/10.1002/bio.4544

Vancouver

Sharma V, Maurya S, Anu, Prasad A, Rao AS. Structural, optical, and luminescence properties of Dy 3+ ‐activated potassium calcium silicate phosphor for white light‐emitting diodes. Luminescence. 2023. doi:10.1002/bio.4544

BibTeX
@article{Sharma2023,
  author = {Sharma, Vibha and Maurya, Shreya and Anu and Prasad, Aman and Rao, Allam Srinivasa},
  title = {Structural, optical, and luminescence properties of Dy 3+ ‐activated potassium calcium silicate phosphor for white light‐emitting diodes},
  journal = {Luminescence},
  year = {2023},
  doi = {10.1002/bio.4544}
}
Kostenlos starten →