EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Hydrothermal liquefaction of microalgae: Aspen Plus modeling improvement, product distribution, and energy analysis for biocrude production

Gabriel Gomes De Luca Gonçalves, Osvaldo José Venturini, Electo Eduardo Silva Lora

Biofuels, Bioproducts and Biorefining · 13.11.2026

DOI: 10.1002/bbb.70240 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Biofuels, Bioproducts and Biorefining, online erschienen am 13.11.2026. Verfasst von Gabriel Gomes De Luca Gonçalves und 2 weiteren Autor:innen. Die Arbeit nennt 41 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The growing demand for sustainable energy highlights the need to reduce reliance on fossil fuels and decarbonize hard‐to‐abate sectors such as cement, metallurgy, and aviation. As a promising pathway, microalgae cultivation can utilize industrial CO 2 emissions, which, when associated with hydrothermal liquefaction (HTL), enables net‐zero systems in a biorefinery context. This thermochemical process converts biomass into biocrude, biogas, hydrochar, and wastewater, with the oily phase that can be refined to produce commercial biofuels in subsequent upgrading and separation stages. In this study, a kinetic Aspen Plus model was developed using a plug‐flow reactor to evaluate product yields and compositions for Chlorella sp., Nannochloropsis sp., and Pavlova sp. at 250 bar and temperatures ranging from 250 to 400 °C. Average dry‐basis biocrude yields ranged from 31.60% to 43.80%, with higher lipid content correlating with greater yields. Elevated temperatures favored aqueous‐phase products, while increased biomass concentrations (15–25%) enhanced biocrude output. An energy assessment revealed that although higher temperatures increased the biocrude's higher heating value to 40.48 MJ kg −1 , they significantly elevated the specific energy consumption, causing the net energy ratio to drop from 0.63 to 0.35, identifying 250 °C as the most efficient operating temperature from an energy perspective. Additionally, the Van Krevelen diagrams confirmed successful deoxygenation and denitrogenation pathways, since the biocrude exhibited a reduction in its O/C ratio to 0.04 and an increase in H/C to 1.90 due to dehydration and decarboxylation, yielding a high‐quality product with properties closer to crude liquid fossil fuels, while heteroatoms migrated predominantly to the aqueous and gaseous phases. The model, validated against literature and experimental data, accurately represents HTL kinetics without external scripts. These findings provide a modeling approach that supports process optimization, techno‐economic evaluation, and integration of HTL into sustainable biorefinery setups.

Zitieren

APA

Gonçalves, G. G. D. L., Venturini, O. J., & Lora, E. E. S. (2026). Hydrothermal liquefaction of microalgae: Aspen Plus modeling improvement, product distribution, and energy analysis for biocrude production. Biofuels, Bioproducts and Biorefining. https://doi.org/10.1002/bbb.70240

Vancouver

Gonçalves GGDL, Venturini OJ, Lora EES. Hydrothermal liquefaction of microalgae: Aspen Plus modeling improvement, product distribution, and energy analysis for biocrude production. Biofuels, Bioproducts and Biorefining. 2026. doi:10.1002/bbb.70240

BibTeX
@article{Gonalves2026,
  author = {Gonçalves, Gabriel Gomes De Luca and Venturini, Osvaldo José and Lora, Electo Eduardo Silva},
  title = {Hydrothermal liquefaction of microalgae: Aspen Plus modeling improvement, product distribution, and energy analysis for biocrude production},
  journal = {Biofuels, Bioproducts and Biorefining},
  year = {2026},
  doi = {10.1002/bbb.70240}
}
Kostenlos starten →