Optimized bifunctional CuNiMgAl catalysts for efficient synthesis of the renewable bioproduct glycerol carbonate
Biofuels, Bioproducts and Biorefining · 2025-09 · 19 (5) · 1271-1288
DOI: 10.1002/bbb.70008 ↗Kurz gefasst
Fachartikel in der Zeitschrift Biofuels, Bioproducts and Biorefining, online erschienen am 06.07.2025. Verfasst von Dalma S. Argüello und 5 weiteren Autor:innen. Die Arbeit wurde bisher 4-mal zitiert (Crossref) und nennt 120 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-ND 4.0). Gefördert von: Agencia Estatal de Investigación, Consejo Nacional de Investigaciones Científicas y Técnicas.
Abstract (Originalsprache)
This paper presents a novel technology for converting glycerol, a byproduct of the biodiesel industry, into glycerol carbonate, a high‐value bioproduct. The effect of calcination temperature on the synthesis of quaternary Cu‐Ni‐Mg‐Al catalysts (MMO‐Cu 15 Ni 15 ‐T z ) and their application in the transesterification reaction was investigated. Glycerol conversion remained largely unaffected by calcination temperature; however, selectivity toward glycerol carbonate was influenced. Physicochemical analyses showed increased crystallinity and spinel phase formation with higher calcination temperatures, resulting in lower oxide dispersion and decreased specific surface area. Nonetheless, the preservation of nanolayer morphology and increased pore diameter maintained high conversion rates at elevated temperatures. X‐ray photoelectron spectroscopy (XPS) confirmed Cu 2+ interactions with the MgAl matrix and the formation of a solid solution. Ultraviolet‐visible diffuse reflectance (UV‐visible DR) spectroscopy indicated the dominance of octahedrally coordinated Cu 2+ and spinel phases at the highest temperature. The MMO‐Cu 15 Ni 15 ‐T 450 catalyst exhibited the highest concentration of strong basic sites and the lowest concentration of very strong basic sites. Acid–base characterization suggested that very strong basic sites and abundant acid sites promote glycidol formation by glycerol carbonate decarboxylation. Calcination at 450 °C was identified as optimal, maximizing glycerol carbonate yield while minimizing byproduct formation. This work supports a biorefinery approach aligned with circular economy principles to reduce the environmental impact of biodiesel production through the use of cost‐effective catalysts and efficient processes.
Förderung
- Agencia Estatal de Investigación
- Consejo Nacional de Investigaciones Científicas y Técnicas
Zitieren
APA
Argüello, D. S., Barroso‐Martín, I., Bálsamo, N. F., Eimer, G. A., Crivello, M. E., & Rodríguez‐Castellón, E. (2025). Optimized bifunctional CuNiMgAl catalysts for efficient synthesis of the renewable bioproduct glycerol carbonate. Biofuels, Bioproducts and Biorefining, 19(5), 1271-1288. https://doi.org/10.1002/bbb.70008
Vancouver
Argüello DS, Barroso‐Martín I, Bálsamo NF, Eimer GA, Crivello ME, Rodríguez‐Castellón E. Optimized bifunctional CuNiMgAl catalysts for efficient synthesis of the renewable bioproduct glycerol carbonate. Biofuels, Bioproducts and Biorefining. 2025;19(5):1271-1288. doi:10.1002/bbb.70008
BibTeX
@article{Argello2025,
author = {Argüello, Dalma S. and Barroso‐Martín, Isabel and Bálsamo, Nancy F. and Eimer, Griselda A. and Crivello, Mónica E. and Rodríguez‐Castellón, Enrique},
title = {Optimized bifunctional CuNiMgAl catalysts for efficient synthesis of the renewable bioproduct glycerol carbonate},
journal = {Biofuels, Bioproducts and Biorefining},
year = {2025},
volume = {19},
number = {5},
pages = {1271--1288},
doi = {10.1002/bbb.70008}
}
EUVIMED