EUVIMEDEUVIMED entdecken
Crossref

Synergy‐Driven MoS 2 /NPC–CoO/Co Interlayer for Polysulfide Regulation and High‐Performance Li–S Batteries

Hamed Pourzolfaghar, Xin‐Yu Jiang, Jia‐Qing Liao, Sheng‐Lin Hsieh, Yong‐Jie Wang, Bing‐Sen Pan, Yuan‐Yao Li

Batteries & Supercaps · 2026-07 · 9 (7)

DOI: 10.1002/batt.70381 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Batteries & Supercaps, online erschienen am 09.07.2026. Verfasst von Hamed Pourzolfaghar und 6 weiteren Autor:innen. Die Arbeit nennt 49 Literaturangaben. Gefördert von: National Science and Technology Council.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Lithium–sulfur (Li–S) batteries offer high theoretical energy density but remain limited by sluggish polysulfide conversion and severe shuttle effects. Here, a multifunctional interlayer composed of molybdenum disulfide anchored on nitrogen‐doped porous carbon coupled with cobalt oxide and metallic cobalt (MoS 2 /NPC–CoO/Co) is developed. The heterostructure interlayer integrates strong polysulfide adsorption by polar CoO sites, catalytic sulfur conversion promoted by MoS 2 and Co species, enhanced charge transport through conductive NPC and metallic Co, and physical suppression of polysulfide diffusion via a porous framework. Benefiting from these synergistic effects, the Li–S cell delivers a high initial capacity of 1411.3 mAh g −1 at 0.1 C, low polarization (Δ E = 233.5 mV), and enhanced Li + diffusion kinetics. Remarkably, the cell retains 707 mAh g −1 after 300 cycles at 1.0 C with only 0.1% capacity decay per cycle and maintains stable operation at a sulfur loading of 2.3 mg cm −2 and an electrolyte/sulfur ratio of 8 μL mg −1 . DFT calculations, including adsorption‐energy, Mulliken charge‐transfer, and PDOS analyses, reveal strong interfacial interaction between Li 2 S x species and CoO, while metallic Co facilitates electron transfer, collectively validating the experimentally observed adsorption‐catalytic synergy. This work demonstrates an effective sulfide–oxide heterointerlayer strategy for high‐performance Li–S batteries.

Förderung

  • National Science and Technology Council

Zitieren

APA

Pourzolfaghar, H., Jiang, X., Liao, J., Hsieh, S., Wang, Y., Pan, B., & Li, Y. (2026). Synergy‐Driven MoS 2 /NPC–CoO/Co Interlayer for Polysulfide Regulation and High‐Performance Li–S Batteries. Batteries & Supercaps, 9(7). https://doi.org/10.1002/batt.70381

Vancouver

Pourzolfaghar H, Jiang X, Liao J, Hsieh S, Wang Y, Pan B, et al. Synergy‐Driven MoS 2 /NPC–CoO/Co Interlayer for Polysulfide Regulation and High‐Performance Li–S Batteries. Batteries & Supercaps. 2026;9(7). doi:10.1002/batt.70381

BibTeX
@article{Pourzolfaghar2026,
  author = {Pourzolfaghar, Hamed and Jiang, Xin‐Yu and Liao, Jia‐Qing and Hsieh, Sheng‐Lin and Wang, Yong‐Jie and Pan, Bing‐Sen and Li, Yuan‐Yao},
  title = {Synergy‐Driven MoS 2 /NPC–CoO/Co Interlayer for Polysulfide Regulation and High‐Performance Li–S Batteries},
  journal = {Batteries & Supercaps},
  year = {2026},
  volume = {9},
  number = {7},
  doi = {10.1002/batt.70381}
}
Kostenlos starten →