Comparative Study of Lithium–Sulfur and Sodium–Sulfur Batteries Using a Binder‐Free Hot‐Pressed Sulfur Cathode
Batteries & Supercaps · 2026-06 · 9 (6)
DOI: 10.1002/batt.70369 ↗Kurz gefasst
Fachartikel in der Zeitschrift Batteries & Supercaps, online erschienen am 10.06.2026. Verfasst von Hooi Fang (Megan) Tham und 2 weiteren Autor:innen. Die Arbeit nennt 40 Literaturangaben. Gefördert von: NSTC.
Abstract (Originalsprache)
Lithium–sulfur and sodium–sulfur cells share a sulfur‐based conversion chemistry but exhibit different electrochemical behaviors, degradation pathways, and ion‐transport characteristics. However, these intrinsic differences remain insufficiently understood. Here, we establish a systematic and controlled comparative framework to isolate the fundamental differences between lithium‐metal and sodium‐metal anodes using an identical, binder‐free hot‐pressed sulfur cathode. The cathode is fabricated by melting and pressing recycled sulfur into a carbon‐paper substrate, eliminating polymer binders, conductive additives, and slurry‐processing residues. By achieving identical cathode architectures, separators, and cell‐assembly parameters, the intrinsic influence of the metal anode on both dynamic cycling behavior and static self‐discharge characteristics can, for the first time, be directly and unambiguously evaluated. Electrochemical impedance spectroscopy reveals slower interfacial kinetics in sodium–sulfur cells compared to lithium–sulfur cells. The lithium–sulfur cell delivers an initial capacity of 892 mA h g −1 with ∼99% discharge/charge efficiency, whereas the sodium–sulfur cell achieves only 515 mA h g −1 with lower efficiency (71–93%). Static self‐discharge tests further demonstrate severe voltage decay and limited capacity recovery in sodium–sulfur cells. Combined dynamic and static analyses reveal disparities arising from slower sodium‐ion kinetics, uneven polysulfide solubility, and larger sulfide‐induced volume expansion.
Förderung
- NSTC
Zitieren
APA
Tham, H. F. M., Wu, C., & Chung, S. (2026). Comparative Study of Lithium–Sulfur and Sodium–Sulfur Batteries Using a Binder‐Free Hot‐Pressed Sulfur Cathode. Batteries & Supercaps, 9(6). https://doi.org/10.1002/batt.70369
Vancouver
Tham HFM, Wu C, Chung S. Comparative Study of Lithium–Sulfur and Sodium–Sulfur Batteries Using a Binder‐Free Hot‐Pressed Sulfur Cathode. Batteries & Supercaps. 2026;9(6). doi:10.1002/batt.70369
BibTeX
@article{Tham2026,
author = {Tham, Hooi Fang (Megan) and Wu, Cheng‐Che and Chung, Sheng‐Heng},
title = {Comparative Study of Lithium–Sulfur and Sodium–Sulfur Batteries Using a Binder‐Free Hot‐Pressed Sulfur Cathode},
journal = {Batteries & Supercaps},
year = {2026},
volume = {9},
number = {6},
doi = {10.1002/batt.70369}
}
EUVIMED