EUVIMEDEUVIMED entdecken
Crossref

Improved Performance of Lithium Metal Batteries Based on Dry‐Processed Composite Solid‐State Electrolyte via Interfacial Engineering Method

Tamene Beshaw Tirfie, Tadesu Hailu Mengesha, Desalegn Yilma Kibret, Yi‐Shiuan Wu, Ghufira, Jenn‐Shing Chen, Jeng‐Kuei Chang, Rajan Jose, Chun‐Chen Yang

Batteries & Supercaps · 2026-07 · 9 (7)

DOI: 10.1002/batt.70338 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Batteries & Supercaps, online erschienen am 23.06.2026. Verfasst von Tamene Beshaw Tirfie und 8 weiteren Autor:innen. Die Arbeit nennt 78 Literaturangaben. Gefördert von: National Science and Technology Council.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Composite solid‐state electrolytes (CSEs) paired with high‐voltage cathode materials have emerged as a promising candidate for next‐generation lithium metal batteries (LMBs). However, interfacial incompatibility between electrodes and polymer‐ceramic components severely hinders their electrochemical performance. Herein, we synthesized a dry‐processed CSE via thermal extrusion blending of dual active fillers, Li 6.25 Al 0.25 La 3 Zr 2 O 12 (LALZO) and LiTa 2 PO 8 (LTPO), into PVDF‐HFP/PEO/SN polymer matrices and LiTFSI salt. To enhance interfacial compatibility and structural integration, a poly(ethylene glycol) diacrylate (PEGDA) cross‐linked buffer layer (PDF‐CSE) was utilized. This layer synergistically interacts with lithium difluoro(oxalato)borate (LiDFOB) and lithium difluorophosphate (LiDFP), facilitating the formation of robust solid electrolyte interphase (SEI) and cathode electrolyte interphase (CEI) layers. The resulting PDF‐CSE exhibited stable Li plating/stripping cycling stability over 2500 h at a current density of 0.5 mA cm −2 with an areal capacity of 1 mAh cm −2 . Our PDF‐CSE assembled with a polyacrylonitrile‐coated single‐crystal LiNi 0.86 Co 0.05 Mn 0.05 Al 0.04 O 2 (PS‐NCMA86) cathode exhibited a high discharge capacity of 130.48 mAh g −1 after 500 cycles at 0.5C (2.8–4.3 V), with a capacity retention of 80.23% and a coulombic efficiency of 99.86%. The electrolyte demonstrated remarkable cycling stability over 100 cycles at a high voltage of 4.5 V. Our novel interfacial engineering approach paves the way for advanced high‐energy density LMBs.

Förderung

  • National Science and Technology Council

Zitieren

APA

Tirfie, T. B., Mengesha, T. H., Kibret, D. Y., Wu, Y., Ghufira, Chen, J., Chang, J., Jose, R., & Yang, C. (2026). Improved Performance of Lithium Metal Batteries Based on Dry‐Processed Composite Solid‐State Electrolyte via Interfacial Engineering Method. Batteries & Supercaps, 9(7). https://doi.org/10.1002/batt.70338

Vancouver

Tirfie TB, Mengesha TH, Kibret DY, Wu Y, Ghufira, Chen J, et al. Improved Performance of Lithium Metal Batteries Based on Dry‐Processed Composite Solid‐State Electrolyte via Interfacial Engineering Method. Batteries & Supercaps. 2026;9(7). doi:10.1002/batt.70338

BibTeX
@article{Tirfie2026,
  author = {Tirfie, Tamene Beshaw and Mengesha, Tadesu Hailu and Kibret, Desalegn Yilma and Wu, Yi‐Shiuan and Ghufira and Chen, Jenn‐Shing and Chang, Jeng‐Kuei and Jose, Rajan and Yang, Chun‐Chen},
  title = {Improved Performance of Lithium Metal Batteries Based on Dry‐Processed Composite Solid‐State Electrolyte via Interfacial Engineering Method},
  journal = {Batteries & Supercaps},
  year = {2026},
  volume = {9},
  number = {7},
  doi = {10.1002/batt.70338}
}
Kostenlos starten →