EUVIMEDEUVIMED entdecken
Crossref

Titanium Carbide MXene and Silver Nanowire Composite Ink for Transparent Flexible Printed Micro‐Supercapacitors

Neha Sharma, Shravani Kale, Neethu Thomas, Sangeeta Kale, Debdutta Ray, Parasuraman Swaminathan

Batteries & Supercaps · 2025-12 · 8 (12)

DOI: 10.1002/batt.202500319 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Batteries & Supercaps, online erschienen am 16.07.2025. Verfasst von Neha Sharma und 5 weiteren Autor:innen. Die Arbeit wurde bisher 6-mal zitiert (Crossref) und nennt 69 Literaturangaben. Gefördert von: Indian Institute of Technology Madras.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Micro‐supercapacitors ( m ‐SCs) are a competent power source for flexible and transparent electronics due to their compact and adaptive design. However, high‐performance transparent m ‐SCs require an optimum balance between transparency and storage capacity. Herein, a composite of titanium carbide (Ti 3 C 2 T x ) and silver nanowires (Ag NWs) is proposed as electrodes for flexible and transparent m ‐SCs. This composite is synthesized in the form of a printable ink for direct ink writing (DIW) of the m ‐SC using poly(3,4‐ethylenedioxythiophene):polystyrenesulfonate (PEDOT:PSS) as the conductive binder. The concentration of the Ag NWs, Ti 3 C 2 T x , and PEDOT:PSS in the ink is optimized to ensure high optical transparency, flexibility, and electrochemical performance of the m ‐SC. The optimized printed m ‐SC exhibits an areal capacitance of 8.34 mF cm −2 and a transparency of ≈82% (at 550 nm) resulting in a high figure of merit of 15.1 F S −1 cm −2 . It also shows high mechanical stability by retaining ≈97% of its original capacitance in various bent positions. Printing of an m ‐SCs array is demonstrated in a single step by utilizing DIW. This array is used to power a surface‐mount display LED. The obtained results for the developed m ‐SC promise its high suitability for futuristic, fully wearable, and invisible electronics.

Förderung

  • Indian Institute of Technology Madras

Zitieren

APA

Sharma, N., Kale, S., Thomas, N., Kale, S., Ray, D., & Swaminathan, P. (2025). Titanium Carbide MXene and Silver Nanowire Composite Ink for Transparent Flexible Printed Micro‐Supercapacitors. Batteries & Supercaps, 8(12). https://doi.org/10.1002/batt.202500319

Vancouver

Sharma N, Kale S, Thomas N, Kale S, Ray D, Swaminathan P. Titanium Carbide MXene and Silver Nanowire Composite Ink for Transparent Flexible Printed Micro‐Supercapacitors. Batteries & Supercaps. 2025;8(12). doi:10.1002/batt.202500319

BibTeX
@article{Sharma2025,
  author = {Sharma, Neha and Kale, Shravani and Thomas, Neethu and Kale, Sangeeta and Ray, Debdutta and Swaminathan, Parasuraman},
  title = {Titanium Carbide MXene and Silver Nanowire Composite Ink for Transparent Flexible Printed Micro‐Supercapacitors},
  journal = {Batteries & Supercaps},
  year = {2025},
  volume = {8},
  number = {12},
  doi = {10.1002/batt.202500319}
}
Kostenlos starten →