Towards Scalable Production of Sodium‐Ion Batteries: Solvent‐Free Layered‐Oxide Cathodes and Aqueous‐Processed Hard Carbon Anodes for Cost‐Effective Full‐Cell Manufacturing
Batteries & Supercaps · 2025-05 · 8 (5)
DOI: 10.1002/batt.202400572 ↗Kurz gefasst
Fachartikel in der Zeitschrift Batteries & Supercaps, online erschienen am 05.02.2025. Verfasst von Johannes Kühn und 9 weiteren Autor:innen. Die Arbeit wurde bisher 14-mal zitiert (Crossref) und nennt 52 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Bundesministerium für Wirtschaft und Klimaschutz.
Abstract (Originalsprache)
Achieving commercial viability for more sustainable sodium‐ion batteries (SIB) necessitates reducing the environmental impact of production, particularly originating from electrode drying and the use of toxic solvents like N‐methyl‐2‐pyrrolidone (NMP). This study presents the dry‐processing of commercial P2‐type Na 0.75 Ni 0.25 Fe 0.25 Mn 0.50 O 2 (NFM) via the DRYtraec® process, aiming to lower the binder content of 1 wt.% polytetrafluoroethylene (PTFE) and eliminating the need for electrode drying and NMP recovery. Assessments of electrode morphology and active material crystallinity were conducted to gauge the effects of mechanical stress during processing. The resulting cathodes, loaded at a commercially relevant 2.3–2.7 mAh cm −2 loading, were successfully paired with aqueous‐processed hard carbon (HC) anodes, demonstrating stable performance in full‐cells. Comparative analysis with entirely wet‐processed electrodes revealed comparable capacity accessibility and comparable long‐term stability. This showed the competitiveness of dry‐processed cathodes. Finally, the integration of NMP‐free, dry‐processed cathodes and aqueous‐processed anodes was scaled to the commercially relevant prototype pouch‐cell. The cell demonstrates stable cycling for 400 cycles with an energy density of 102 Wh kg −1 as well as reduced processing costs and environmental footprint.
Förderung
- Bundesministerium für Wirtschaft und Klimaschutz
Zitieren
APA
Kühn, J., Schmidt, F., Seete, P., Boenke, T., Hoffmann, F. S., Dupuy, A., Schumm, B., Abendroth, T., Althues, H., & Kaskel, S. (2025). Towards Scalable Production of Sodium‐Ion Batteries: Solvent‐Free Layered‐Oxide Cathodes and Aqueous‐Processed Hard Carbon Anodes for Cost‐Effective Full‐Cell Manufacturing. Batteries & Supercaps, 8(5). https://doi.org/10.1002/batt.202400572
Vancouver
Kühn J, Schmidt F, Seete P, Boenke T, Hoffmann FS, Dupuy A, et al. Towards Scalable Production of Sodium‐Ion Batteries: Solvent‐Free Layered‐Oxide Cathodes and Aqueous‐Processed Hard Carbon Anodes for Cost‐Effective Full‐Cell Manufacturing. Batteries & Supercaps. 2025;8(5). doi:10.1002/batt.202400572
BibTeX
@article{Khn2025,
author = {Kühn, Johannes and Schmidt, Florian and Seete, Pascal and Boenke, Tom and Hoffmann, Florian S. and Dupuy, Arthur and Schumm, Benjamin and Abendroth, Thomas and Althues, Holger and Kaskel, Stefan},
title = {Towards Scalable Production of Sodium‐Ion Batteries: Solvent‐Free Layered‐Oxide Cathodes and Aqueous‐Processed Hard Carbon Anodes for Cost‐Effective Full‐Cell Manufacturing},
journal = {Batteries & Supercaps},
year = {2025},
volume = {8},
number = {5},
doi = {10.1002/batt.202400572}
}
EUVIMED