EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Elucidating Gas Evolution of Prussian White Cathodes for Sodium‐ion Battery Application: The Effect of Electrolyte and Moisture

Sören L. Dreyer, Faduma M. Maddar, Aleksandr Kondrakov, Jürgen Janek, Ivana Hasa, Torsten Brezesinski

Batteries & Supercaps · 2024-04 · 7 (4)

DOI: 10.1002/batt.202300595 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Batteries & Supercaps, online erschienen am 31.01.2024. Verfasst von Sören L. Dreyer und 5 weiteren Autor:innen. Die Arbeit wurde bisher 27-mal zitiert (Crossref) und nennt 139 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: BASF, Deutsche Forschungsgemeinschaft, Horizon 2020 Framework Programme.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

As global energy storage demand increases, sodium‐ion batteries are often considered as an alternative to lithium‐ion batteries. Hexacyanoferrate cathodes, commonly referred to as Prussian blue analogues (PBAs), are of particular interest due their low‐cost synthesis and promising electrochemical response. However, because they consist of ~50 wt% cyanide anions, a possible release of highly toxic cyanide gases poses a significant safety risk. Previously, we observed the evolution of (CN) 2 during cycling via differential electrochemical mass spectrometry (DEMS), but were unable to determine a root cause or mechanism. In this work, we present a systematical investigation of the gas evolution of Prussian white (PW) with different water content via DEMS. While H 2 is the main gas detected, especially in hydrated PW and during overcharge (4.6 V vs. Na + /Na), the evolution of CO 2 and (CN) 2 depends on the electrolyte conductive salt. The use of oxidative NaClO 4 instead of NaPF 6 is the leading cause for the formation of (CN) 2 . Mass spectrometric evidence of trace amounts of HCN is also found, but to a much lower extent than (CN) 2 , which is the dominant safety risk when using NaClO 4 ‐containing electrolyte, which despite being a good model salt, is not a viable option for commercial applications.

Förderung

  • BASF
  • Deutsche Forschungsgemeinschaft
  • Horizon 2020 Framework Programme
  • Royal Society

Zitieren

APA

Dreyer, S. L., Maddar, F. M., Kondrakov, A., Janek, J., Hasa, I., & Brezesinski, T. (2024). Elucidating Gas Evolution of Prussian White Cathodes for Sodium‐ion Battery Application: The Effect of Electrolyte and Moisture. Batteries & Supercaps, 7(4). https://doi.org/10.1002/batt.202300595

Vancouver

Dreyer SL, Maddar FM, Kondrakov A, Janek J, Hasa I, Brezesinski T. Elucidating Gas Evolution of Prussian White Cathodes for Sodium‐ion Battery Application: The Effect of Electrolyte and Moisture. Batteries & Supercaps. 2024;7(4). doi:10.1002/batt.202300595

BibTeX
@article{Dreyer2024,
  author = {Dreyer, Sören L. and Maddar, Faduma M. and Kondrakov, Aleksandr and Janek, Jürgen and Hasa, Ivana and Brezesinski, Torsten},
  title = {Elucidating Gas Evolution of Prussian White Cathodes for Sodium‐ion Battery Application: The Effect of Electrolyte and Moisture},
  journal = {Batteries & Supercaps},
  year = {2024},
  volume = {7},
  number = {4},
  doi = {10.1002/batt.202300595}
}
Kostenlos starten →