FeCoNi‐Based Alloy Coatings as Low Overpotential Electrocatalysts for Alkaline Water Electrolysis
Chemistry – An Asian Journal · 17.01.2025 · 20 (2)
DOI: 10.1002/asia.202401086 ↗Kurz gefasst
Fachartikel in der Zeitschrift Chemistry – An Asian Journal, online erschienen am 26.11.2024. Verfasst von Jinyuan Zhong und 6 weiteren Autor:innen. Beteiligte Einrichtung: School of Materials Science and Engineering, Shenyang University of Technology, Shenyang, 110870, P. R. China. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 58 Literaturangaben. Gefördert von: Scientific Research Funding Project of the Education Department of Liaoning Province, Natural Science Foundation of Liaoning Province, Chinese National Natural Science Foundation.
Abstract (Originalsprache)
Developing efficient, stable and low‐cost electrocatalysts is a viable approach to solve the current energy crisis. It is found that increasing the surface area of the electrodes can effectively promote the electrocatalytic efficiency. Herein, the atmospheric plasma spraying (APS) technology was used to prepare FeCoNi‐Ni 3 C alloy coating by adding Ni 3 C powder to FeCoNi powder with an equal molar ratio. After mechanical mixing, the atomic ratios of Ni 3 C in the powder are 25 %, 50 %, and 75 %, respectively. The results prove that the pores on the surface of the coating have increased after Ni 3 C doping, which can provide more active sites in the electrocatalytic process to promote the electrocatalytic reaction. By controlling the proportion of Ni 3 C, the porosity of the coating surface can be effectively regulated. The results suggested that in 1.0 M KOH electrolyte and 10 mA cm −2 , the FeCoNi coating shows an overpotential of 191 and 277 mV for HER and OER, respectively, the HER overpotential of 50 at % Ni 3 C FeCoNi‐Ni 3 C coating is 105 mV, and the OER overpotential is 212 mV. It is worth noting that the 50 at % Ni 3 C FeCoNi–Ni 3 C coating has a low Tafel slope of 45.78 mV dec −1 (HER) and 44 mV dec −1 (OER). Meanwhile, the attenuation of the overpotential of the 50 at % Ni 3 C FeCoNi–Ni 3 C coating after the stability test is almost negligible, indicating that the prepared catalyst has excellent electrocatalytic stability. Furthermore, the 50 at.% Ni 3 C FeCoNi‐Ni 3 C coating catalyst has a low potential of 1.664 V at 10 mA cm −2 in a water‐splitting system. This work provids a new idea for designing inexpensive electrocatalysts.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- School of Materials Science and Engineering, Shenyang University of Technology, Shenyang, 110870, P. R. China.
- School of Architecture and Civil Engineering, Shenyang University of Technology, Shenyang, 110870, P. R. China.
ORCID-Profile: Yuanwu Zhang
Förderung
- Scientific Research Funding Project of the Education Department of Liaoning Province
- Natural Science Foundation of Liaoning Province
- Chinese National Natural Science Foundation
- Basic Scientific Research Project for Higher Education Institutions of Liaoning Province Ministry of Education
- Initial Scientific Research Fund of Young Teachers in Shenyang University of Technology
Zitieren
APA
Zhong, J., Zhang, Y., Huo, X., Zuo, X., Huang, H., Xu, X., & Zhang, N. (2025). FeCoNi‐Based Alloy Coatings as Low Overpotential Electrocatalysts for Alkaline Water Electrolysis. Chemistry – An Asian Journal, 20(2). https://doi.org/10.1002/asia.202401086
Vancouver
Zhong J, Zhang Y, Huo X, Zuo X, Huang H, Xu X, et al. FeCoNi‐Based Alloy Coatings as Low Overpotential Electrocatalysts for Alkaline Water Electrolysis. Chemistry – An Asian Journal. 2025;20(2). doi:10.1002/asia.202401086
BibTeX
@article{Zhong2025,
author = {Zhong, Jinyuan and Zhang, Yuanwu and Huo, Xiaoran and Zuo, Xiaojiao and Huang, Hongjun and Xu, Xuelu and Zhang, Nannan},
title = {FeCoNi‐Based Alloy Coatings as Low Overpotential Electrocatalysts for Alkaline Water Electrolysis},
journal = {Chemistry – An Asian Journal},
year = {2025},
volume = {20},
number = {2},
doi = {10.1002/asia.202401086}
}
EUVIMED