Controlling photopolymerization reaction in layer‐by‐layer photopolymerization in 3D printing
Applied Research · 2024-08 · 3 (4)
DOI: 10.1002/appl.202400004 ↗Kurz gefasst
Fachartikel in der Zeitschrift Applied Research, online erschienen am 25.02.2024. Verfasst von Xavier Allonas und 6 weiteren Autor:innen. Die Arbeit wurde bisher 16-mal zitiert (Crossref) und nennt 27 Literaturangaben.
Abstract (Originalsprache)
Today, controlling the photopolymerization process during the 3D printing in vat photopolymerization is a key challenge. In this work, it is shown that using a relatively limited set of parameter, it is possible to estimate key factors involved in such process. On the basis of 16 formulations containing different concentrations of photoinitiator and UV filter, attempt was made to rationalize the photonic parameters used in the 3D printing process, that is, the depth of penetration Dp and the critical energy Ec . It is shown that the experimental Dp values can be correlated with calculated ones from Bouguer–Beer–Lambert law. Real‐time Fourier‐transform infrared spectroscopy (RT‐FTIR) experiments were performed under similar conditions as in 3D printing. The conversion profiles were used to estimate the Ec values. The limits of this approach was discussed as a function of the UV filter concentration. Finally, the RT‐FTIR curves are exploited to predict the in‐depth conversion of the different 3D printed layers and compared to experimental results obtained by confocal Raman microscopy.
Zitieren
APA
Allonas, X., Hammouda, B., Métral, B., Goldbach, E., Schuller, A., Ley, C., & Croutxé‐Barghorn, C. (2024). Controlling photopolymerization reaction in layer‐by‐layer photopolymerization in 3D printing. Applied Research, 3(4). https://doi.org/10.1002/appl.202400004
Vancouver
Allonas X, Hammouda B, Métral B, Goldbach E, Schuller A, Ley C, et al. Controlling photopolymerization reaction in layer‐by‐layer photopolymerization in 3D printing. Applied Research. 2024;3(4). doi:10.1002/appl.202400004
BibTeX
@article{Allonas2024,
author = {Allonas, Xavier and Hammouda, Ben and Métral, Boris and Goldbach, Emile and Schuller, Anne‐Sophie and Ley, Christian and Croutxé‐Barghorn, C.Céline},
title = {Controlling photopolymerization reaction in layer‐by‐layer photopolymerization in 3D printing},
journal = {Applied Research},
year = {2024},
volume = {3},
number = {4},
doi = {10.1002/appl.202400004}
}
EUVIMED