Thermal, Mechanical, and Electrical Properties of AlN /Polyamide‐Imide and AlN –Ag/Polyamide‐Imide Composite Films Fabricated by Solution Casting
Journal of Applied Polymer Science · 07.11.2026
DOI: 10.1002/app.71743 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Applied Polymer Science, online erschienen am 07.11.2026. Verfasst von Li Zhang und 7 weiteren Autor:innen. Die Arbeit nennt 45 Literaturangaben. Gefördert von: Fujian Provincial Department of Science and Technology.
Abstract (Originalsprache)
Balanced optimization of thermal, mechanical, and electrical properties at low filler loading remains challenging for thermally conductive polymer composites. Polyamide‐imide (PAI) was used as the matrix, and aluminum nitride (AlN) particles as the thermally conductive filler. AlN/PAI composite films with 1–15 wt% AlN (below the percolation threshold) were fabricated by solution casting. To further enhance thermal conductivity, silver nanoparticles (AgNPs) were anchored onto the modified AlN surface via in situ reduction to prepare AlN–Ag/PAI composite films. The thermal conductivity of pure PAI (0.093 W/(m·K)) was enhanced by approximately 5.5 times after AlN incorporation. Owing to the local bridging effect of AgNPs, the thermal conductivity of the 15 wt% AlN–Ag/PAI composite film reached 0.605 W/(m·K), 18.2% higher than the corresponding AlN/PAI film. Both AlN and AlN–Ag fillers improved the thermal stability of the composite films and increased the calculated LOI values derived from the TGA char residue. Mechanical properties gradually decreased with rising filler fraction; nevertheless, AgNP decoration partially alleviated the tensile strength deterioration. Electrical characterization revealed that the volume resistivity of the composite films remained above 10 14 Ω·cm even at 15 wt% filler loading, indicating satisfactory electrical insulation for electronic packaging.
Förderung
- Fujian Provincial Department of Science and Technology
Zitieren
APA
Zhang, L., Wang, J., Geng, H., Gu, S., Li, T., Fan, X., Chen, S., & Zuo, J. (2026). Thermal, Mechanical, and Electrical Properties of AlN /Polyamide‐Imide and AlN –Ag/Polyamide‐Imide Composite Films Fabricated by Solution Casting. Journal of Applied Polymer Science. https://doi.org/10.1002/app.71743
Vancouver
Zhang L, Wang J, Geng H, Gu S, Li T, Fan X, et al. Thermal, Mechanical, and Electrical Properties of AlN /Polyamide‐Imide and AlN –Ag/Polyamide‐Imide Composite Films Fabricated by Solution Casting. Journal of Applied Polymer Science. 2026. doi:10.1002/app.71743
BibTeX
@article{Zhang2026,
author = {Zhang, Li and Wang, Jieying and Geng, Heyi and Gu, Siyong and Li, Tao and Fan, Xinyi and Chen, Shuhao and Zuo, Juan},
title = {Thermal, Mechanical, and Electrical Properties of AlN /Polyamide‐Imide and AlN –Ag/Polyamide‐Imide Composite Films Fabricated by Solution Casting},
journal = {Journal of Applied Polymer Science},
year = {2026},
doi = {10.1002/app.71743}
}
EUVIMED