EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Compositional Time–Temperature–Transformation and Post‐Processing Window Mapping of Epoxy Nanocomposites via Machine Learning

Otávio Bianchi, Dante A. Benvenutti, Leonardo B. Canto, Alessandra Lavoratti, Zainab Al‐Maqdasi, Sandro Campos Amico, Patrik Fernberg

Journal of Applied Polymer Science · 20.10.2026 · 143 (40)

DOI: 10.1002/app.71300 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Applied Polymer Science, online erschienen am 02.08.2026. Verfasst von Otávio Bianchi und 6 weiteren Autor:innen. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 48 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Coordenação de Aperfeiçoamento de Pessoal de Nível Superior, Conselho Nacional de Desenvolvimento Científico e Tecnológico.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Time–temperature–transformation (TTT) diagrams are essential for defining processing windows in thermoset systems, but become experimentally impractical for nanofiller‐containing compositions. Here, DGEBA/TETA‐based epoxy systems containing graphene nanoplatelets (GN) or carbon nanotubes (CNT) (0–1 wt%) were investigated using DSC, rheological gelation, kinetic modeling, and machine‐learning‐assisted interpolation. Cure kinetics were described using a Kamal–Sourour model with diffusion control, combined with Di Benedetto vitrification analysis. Gel activation energies remained within 44–51 kJ·mol −1 , and gelation occurred at α g ≈0.70–0.88 for all formulations, confirming preservation of the intrinsic single‐step autocatalytic epoxy–amine reaction mechanism. In contrast, CNT significantly intensified diffusion control, with log K diff decreasing from 5.00 (neat epoxy) to −3.93 (1 wt% CNT). TTT analysis showed that vitrification shift, rather than gel displacement, governs the compression of the compositional cure‐time window. At 80°C, neat epoxy exhibited a post‐gel processing window (Δ t ) of ~40–50 min, GN systems showed Δ t ≈ 17–28 min, while 1 wt% CNT reduced Δ t to ~5–9 min (≈60%–70% contraction). Machine‐learning models accurately reproduced TTT slices (MAE = 0.050 log 10 [min]) and Δ t predictions (MAE = 0.037 log 10 [min], ~9% deviation). This integrated framework converts discrete TTT measurements into continuous compositional cure maps for formulation design and processing optimization.

Förderung

  • Coordenação de Aperfeiçoamento de Pessoal de Nível Superior
  • Conselho Nacional de Desenvolvimento Científico e Tecnológico

Zitieren

APA

Bianchi, O., Benvenutti, D. A., Canto, L. B., Lavoratti, A., Al‐Maqdasi, Z., Amico, S. C., & Fernberg, P. (2026). Compositional Time–Temperature–Transformation and Post‐Processing Window Mapping of Epoxy Nanocomposites via Machine Learning. Journal of Applied Polymer Science, 143(40). https://doi.org/10.1002/app.71300

Vancouver

Bianchi O, Benvenutti DA, Canto LB, Lavoratti A, Al‐Maqdasi Z, Amico SC, et al. Compositional Time–Temperature–Transformation and Post‐Processing Window Mapping of Epoxy Nanocomposites via Machine Learning. Journal of Applied Polymer Science. 2026;143(40). doi:10.1002/app.71300

BibTeX
@article{Bianchi2026,
  author = {Bianchi, Otávio and Benvenutti, Dante A. and Canto, Leonardo B. and Lavoratti, Alessandra and Al‐Maqdasi, Zainab and Amico, Sandro Campos and Fernberg, Patrik},
  title = {Compositional Time–Temperature–Transformation and Post‐Processing Window Mapping of Epoxy Nanocomposites via Machine Learning},
  journal = {Journal of Applied Polymer Science},
  year = {2026},
  volume = {143},
  number = {40},
  doi = {10.1002/app.71300}
}
Kostenlos starten →