Compatibilization and Characterization of Recycled Polyolefin Blends Using α‐Olefin Elastomers for Sustainable High‐Performance Materials
Journal of Applied Polymer Science · 05.10.2026 · 143 (37)
DOI: 10.1002/app.71165 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Applied Polymer Science, online erschienen am 14.07.2026. Verfasst von Ashish Raghavan und 2 weiteren Autor:innen. Die Arbeit nennt 57 Literaturangaben. Gefördert von: Department of Science and Technology, Ministry of Science and Technology, India.
Abstract (Originalsprache)
This study investigates the compatibilization of recycled low‐density polyethylene (RLDPE) and recycled polypropylene (RPP) derived from sterilized biomedical plastic waste using ethylene–octene copolymer (EOC). The influence of EOC on the mechanical, thermal, crystallization, dynamic mechanical, and morphological properties of recycled and virgin polyolefin blends was systematically evaluated. Incorporation of EOC significantly improved the performance of recycled blends, particularly in LDPE‐rich systems. The RLDPPEO‐02 formulation (75/25/10 wt% RLDPE/RPP/EOC) exhibited the highest tensile strength (21.6 MPa), elongation at break (501.4%), impact strength (53.1 kJ/m 2 ), and toughness (8483 MPa), representing substantial improvements over the uncompatibilized blend. Principal Component Analysis identified RLDPPEO‐02 as the optimum formulation with the highest overall performance score. Morphological analysis revealed a reduction in interparticle distance from 0.74 nm in the control blend to 0.43 nm following EOC addition, indicating enhanced phase dispersion and interfacial adhesion. DSC and nonisothermal crystallization studies showed that EOC modified crystallization behavior without eliminating the characteristic thermal transitions of RLDPE and RPP. Dynamic mechanical analysis and heat deflection temperature measurements confirmed improved phase interaction while maintaining acceptable thermal performance. Compared with previously reported EPDM‐based systems, EOC demonstrated superior compatibilization efficiency, providing an effective route for converting biomedical plastic waste into high‐performance recycled polyolefin materials.
Förderung
- Department of Science and Technology, Ministry of Science and Technology, India
Zitieren
APA
Raghavan, A., Mohanty, S., & Nayak, S. K. (2026). Compatibilization and Characterization of Recycled Polyolefin Blends Using α‐Olefin Elastomers for Sustainable High‐Performance Materials. Journal of Applied Polymer Science, 143(37). https://doi.org/10.1002/app.71165
Vancouver
Raghavan A, Mohanty S, Nayak SK. Compatibilization and Characterization of Recycled Polyolefin Blends Using α‐Olefin Elastomers for Sustainable High‐Performance Materials. Journal of Applied Polymer Science. 2026;143(37). doi:10.1002/app.71165
BibTeX
@article{Raghavan2026,
author = {Raghavan, Ashish and Mohanty, Smita and Nayak, Sanjay K.},
title = {Compatibilization and Characterization of Recycled Polyolefin Blends Using α‐Olefin Elastomers for Sustainable High‐Performance Materials},
journal = {Journal of Applied Polymer Science},
year = {2026},
volume = {143},
number = {37},
doi = {10.1002/app.71165}
}
EUVIMED