EUVIMEDEUVIMED entdecken
Crossref

Study on Enhancement of PLA Filament Uniformity Through Regulation of Melt Rheology and Thermal Stability

Zijian Liang, Jianyong Feng

Journal of Applied Polymer Science · 10.09.2026 · 143 (34)

DOI: 10.1002/app.71016 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Applied Polymer Science, online erschienen am 15.06.2026. Verfasst von Zijian Liang und 1 weiteren Autor:innen. Die Arbeit nennt 55 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study used polylactic acid (PLA) as the base material and applied melt spinning process to examine the effects of antioxidant 1010 on the thermal stability, molecular weight retention, rheological behavior, and mechanical uniformity of PLA fibers during processing. By adjusting antioxidant content, draw ratio, processing temperature, and residence time, together with the melt flow behavior, the effects of the antioxidant on reducing thermal degradation and improving spinning uniformity, as well as the influence of processing parameters on fiber uniformity, were investigated. The results show that adding a suitable amount of antioxidant (0.3–0.5 wt%) improves the thermal stability of the PLA melt. Under these conditions, molecular weight retention increases by about 15%, the polydispersity index (PDI) decreases, and molecular chain degradation is reduced. Less chain degradation also leads to better fiber elongation and more uniform mechanical properties, with the coefficient of variation of tensile strength and elongation reduced to about 7%. This study determined suitable processing parameters for single‐screw spinning of the PLA/antioxidant system (antioxidant content of 0.3–0.5 wt%, processing temperature of 190°C, and draw ratio of 15), which support stable processing and structural control of PLA fibers with high uniformity.

Zitieren

APA

Liang, Z., & Feng, J. (2026). Study on Enhancement of PLA Filament Uniformity Through Regulation of Melt Rheology and Thermal Stability. Journal of Applied Polymer Science, 143(34). https://doi.org/10.1002/app.71016

Vancouver

Liang Z, Feng J. Study on Enhancement of PLA Filament Uniformity Through Regulation of Melt Rheology and Thermal Stability. Journal of Applied Polymer Science. 2026;143(34). doi:10.1002/app.71016

BibTeX
@article{Liang2026,
  author = {Liang, Zijian and Feng, Jianyong},
  title = {Study on Enhancement of PLA Filament Uniformity Through Regulation of Melt Rheology and Thermal Stability},
  journal = {Journal of Applied Polymer Science},
  year = {2026},
  volume = {143},
  number = {34},
  doi = {10.1002/app.71016}
}
Kostenlos starten →