EUVIMEDEUVIMED entdecken
Crossref

Compatibility and Electrical–Mechanical Properties of Air Plasma‐Modified PP / POE Blends

Jianmei Cao, Ziyi Zhang, Tianyao Liu, Yunqi Xing, Cheng Yang, Peng Jiang

Journal of Applied Polymer Science · 15.03.2026 · 143 (11)

DOI: 10.1002/app.70248 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Applied Polymer Science, online erschienen am 22.12.2025. Verfasst von Jianmei Cao und 5 weiteren Autor:innen. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 23 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In this paper, air plasma is used to modify polypropylene (PP) to improve the compatibility of PP and poly olefin elastomer (POE), and then improve the electrical and mechanical properties of PP/POE cable insulation materials. Firstly, PP insulation material was modified by air plasma, and PP/POE blends of different proportions were prepared. Secondly, the physicochemical properties of PP/POE blends before and after modification were characterized, and their electrical and mechanical properties were tested. Finally, the mechanism of enhancing the compatibility between PP and POE by air plasma and the effect of compatibility on the electrical–mechanical properties of PP/POE blends were analyzed. The experimental results show that after the modification of PP by plasma treatment, the compatibility between the modified PP and POE is significantly improved, and the electrical and mechanical properties of the modified PP/POE (m‐PP/POE) blend are enhanced. Furthermore, the higher the content of POE in the blend sample, the more significant the improvement in the electrical and mechanical properties of the m‐PP/POE blend. When the ratio of PP to POE component is 6:4, the power frequency dielectric loss of modified PP/POE (m‐PP/POE) sample is reduced by about 31.5% (from 9.10 × 10 −4 to 6.23 × 10 −4 ), the volume resistivity is increased by about 2 times (from 3.57 × 10 15 to 6.14 × 10 15 Ω cm), the breakdown field strength is increased by 14.2% (from 63.5 to 72.5 kV/mm), and the elongation at break is increased by 15% (from 1164.88% to 1339.61%). This work provides a new idea for improving the compatibility of PP and POE, and has great reference significance for improving the performance of high‐voltage polypropylene cables under dual‐carbon background.

Zitieren

APA

Cao, J., Zhang, Z., Liu, T., Xing, Y., Yang, C., & Jiang, P. (2026). Compatibility and Electrical–Mechanical Properties of Air Plasma‐Modified PP / POE Blends. Journal of Applied Polymer Science, 143(11). https://doi.org/10.1002/app.70248

Vancouver

Cao J, Zhang Z, Liu T, Xing Y, Yang C, Jiang P. Compatibility and Electrical–Mechanical Properties of Air Plasma‐Modified PP / POE Blends. Journal of Applied Polymer Science. 2026;143(11). doi:10.1002/app.70248

BibTeX
@article{Cao2026,
  author = {Cao, Jianmei and Zhang, Ziyi and Liu, Tianyao and Xing, Yunqi and Yang, Cheng and Jiang, Peng},
  title = {Compatibility and Electrical–Mechanical Properties of Air Plasma‐Modified PP / POE Blends},
  journal = {Journal of Applied Polymer Science},
  year = {2026},
  volume = {143},
  number = {11},
  doi = {10.1002/app.70248}
}
Kostenlos starten →