EUVIMEDEUVIMED entdecken
Crossref

LLZO ‐Assisted PEO ‐ PVDF Blend‐Based Polymer Electrolytes for Device Application

Tausif Alam, Avirup Das

Journal of Applied Polymer Science · 10.01.2026 · 143 (2)

DOI: 10.1002/app.58007 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Applied Polymer Science, online erschienen am 26.09.2025. Verfasst von Tausif Alam und 1 weiteren Autor:innen. Die Arbeit wurde bisher 5-mal zitiert (Crossref) und nennt 85 Literaturangaben. Gefördert von: Department of Science and Technology, Ministry of Science and Technology, India.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study uses a polymer blend as a host polymer prepared by PEO and PVDF‐HFP, with Li 7 La 3 Zr 2 O 12 (C‐LLZO) and Li 6.5 La 3 Zr 1.75 Te 0.25 O 12 (Te‐LLZO) as ceramic fillers and lithium trifluoro methane sulfonate (LiCF 3 SO 3 ) as a salt. Using the XRD and FTIR spectra, the impact of ceramic (C‐LLZO and Te‐LLZO) on enhancing the salt dissociation and cation coordination with oxygen atoms in PEO and fluorine atoms in PVDF‐HFP has been investigated. Notable changes in ceramic peak intensity, peak position, and the existence of an amorphous hump in XRD spectra indicate an increased amorphous content with low ceramic loading. However, the crystallinity of the electrolyte increases with increasing ceramic loading. With different ceramic loading, the vibrational bands of CF 2 and COC have shifted and varied. It shows that ceramic loading has significantly impacted cation coordination with those peaks. Conversely, the enhanced ion dissociation with ceramic variation is established by the deconvolution of FTIR in the wavenumber region of 1020–1050 cm −1 . The free anion content is substantial at 20 wt% ceramic loading, according to FTIR measurements. It suggests a greater likelihood of available cations for coordination. The optimized polymer blend‐salt‐ceramic composite sample shows an excellent DC conductivity at room temperature of 0.613 × 10 −3 Scm −1 . This is an enhancement of approximately two orders compared to the blend‐salt system. Along with that, this optimized polymer blend composite shows excellent voltage stability of 5.90 V and thermal stability up to ~400°C. Furthermore, an EDLC device has been developed using the optimized composite electrolyte. It shows an impressive specific capacitance of 6.52 mF/g at a 10 mV/s scan rate.

Förderung

  • Department of Science and Technology, Ministry of Science and Technology, India

Zitieren

APA

Alam, T., & Das, A. (2026). LLZO ‐Assisted PEO ‐ PVDF Blend‐Based Polymer Electrolytes for Device Application. Journal of Applied Polymer Science, 143(2). https://doi.org/10.1002/app.58007

Vancouver

Alam T, Das A. LLZO ‐Assisted PEO ‐ PVDF Blend‐Based Polymer Electrolytes for Device Application. Journal of Applied Polymer Science. 2026;143(2). doi:10.1002/app.58007

BibTeX
@article{Alam2026,
  author = {Alam, Tausif and Das, Avirup},
  title = {LLZO ‐Assisted PEO ‐ PVDF Blend‐Based Polymer Electrolytes for Device Application},
  journal = {Journal of Applied Polymer Science},
  year = {2026},
  volume = {143},
  number = {2},
  doi = {10.1002/app.58007}
}
Kostenlos starten →