Hansen Solubility Parameter Guided Development of Furan‐2,5‐Dicarboxylate Plasticizers for Poly(3‐Hydroxybutyrate‐ co ‐3‐Hydroxyhexanoate)
Journal of Applied Polymer Science · 15.11.2025 · 142 (43)
DOI: 10.1002/app.57649 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Applied Polymer Science, online erschienen am 17.07.2025. Verfasst von Kush G. Patel und 7 weiteren Autor:innen. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 50 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
Most “green” plasticizers have poor compatibility with poly(3‐hydroxybutyrate‐ co ‐3‐hydroxyhexanoate) (PHB‐ co ‐HHx), which limits their practical use. Herein, Hansen solubility parameters (HSP) were used to design compatible plasticizers derived from furan‐2,5‐dicarboxylic acid for PHB‐ co ‐HHx. Of the seven derivatives, dipropyl furan‐2,5‐dicarboxylate (DPF; RED—0.23) and di(2‐ethylhexyl) furan‐2,5‐dicarboxylate (DEHF; RED—0.46)), were the most efficient plasticizers, and their blends with PHB‐ co ‐HHx were compared with diethyl phthalate (DEP; RED—0.25). T g depression and Young's modulus of DPF loaded samples were comparable to DEP. However, DPF plasticized samples show much higher % strain at break and slower leaching behavior than DEP. The trend continues as the samples age, and overall performance of DPF loaded samples was observed to be higher than the DEP samples. DEHF samples, on the other hand, showed limited T g depression at loadings greater than 10% w/w but have lower % strain than DEP. However, DEHF does not leach from PHB‐ co ‐HHx under accelerated aging studies. Further studies via polarized optical microscopy (POM) revealed that DEHF phase separates at loadings above 10% w/w, limiting plasticizer migration. Data from POM micrographs correlate with the RED values as the DPF forms a homogenous phase at loadings as high as 50% w/w, while DEP phase separates at the maximum loading.
Zitieren
APA
Patel, K. G., Maynard, R. K., Crane, G. H., Cardona, D., Sun, A., Fenn, G. T., Broich, M. L., & Locklin, J. J. (2025). Hansen Solubility Parameter Guided Development of Furan‐2,5‐Dicarboxylate Plasticizers for Poly(3‐Hydroxybutyrate‐ co ‐3‐Hydroxyhexanoate). Journal of Applied Polymer Science, 142(43). https://doi.org/10.1002/app.57649
Vancouver
Patel KG, Maynard RK, Crane GH, Cardona D, Sun A, Fenn GT, et al. Hansen Solubility Parameter Guided Development of Furan‐2,5‐Dicarboxylate Plasticizers for Poly(3‐Hydroxybutyrate‐ co ‐3‐Hydroxyhexanoate). Journal of Applied Polymer Science. 2025;142(43). doi:10.1002/app.57649
BibTeX
@article{Patel2025,
author = {Patel, Kush G. and Maynard, Ryan K. and Crane, Grant H. and Cardona, Daniella and Sun, Angela and Fenn, Graham T. and Broich, Michael L. and Locklin, Jason J.},
title = {Hansen Solubility Parameter Guided Development of Furan‐2,5‐Dicarboxylate Plasticizers for Poly(3‐Hydroxybutyrate‐ co ‐3‐Hydroxyhexanoate)},
journal = {Journal of Applied Polymer Science},
year = {2025},
volume = {142},
number = {43},
doi = {10.1002/app.57649}
}
EUVIMED