EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Impact of Fiber Morphology and Content on the Thermal Stability, and Mechanical Performance of Maple Wood Fiber‐Polypropylene Composites

Farshid Basiji, Fouad Erchiqui, Ahmed Koubaa, Ismaeil Ghasemi, Abdessamad Baatti

Journal of Applied Polymer Science · 10.08.2025 · 142 (30)

DOI: 10.1002/app.57211 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Applied Polymer Science, online erschienen am 23.04.2025. Verfasst von Farshid Basiji und 4 weiteren Autor:innen. Die Arbeit wurde bisher 7-mal zitiert (Crossref) und nennt 51 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Fondation de l’Université du Québec en Abitibi-Témiscamingue.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In recent years, natural‐fiber‐reinforced polymers have gained significant attention due to their sustainability and enhanced properties. This study used Canadian maple wood fiber as reinforcement in a polypropylene (PP). Fiber length and fiber content are known as key factors affecting the properties of the composites. To investigate the effects of fiber length and fiber content on thermal, mechanical, and morphological properties, samples with 5%, 10%, 15%, and 20% fiber content and fiber lengths of 50, 75, and 100 μm were prepared. The DSC results indicated that adding fibers altered the exothermic and endothermic peaks, increased melting points, and decreased crystallization points, with fiber content having a more significant impact than fiber length. TGA showed that fiber reinforcement led to lower thermal stability at lower temperatures but higher stability at elevated temperatures. The tensile tests revealed that increasing fiber content up to 15% improved strength, while a further increase to 20% resulted in a decrease in strength. These results were repeated for the impact test, and the composites containing 20% by volume of fiber showed the lowest impact strength. SEM analysis showed that beyond a certain fiber content, fiber accumulation occurred, negatively affecting mechanical properties.

Förderung

  • Fondation de l’Université du Québec en Abitibi-Témiscamingue

Zitieren

APA

Basiji, F., Erchiqui, F., Koubaa, A., Ghasemi, I., & Baatti, A. (2025). Impact of Fiber Morphology and Content on the Thermal Stability, and Mechanical Performance of Maple Wood Fiber‐Polypropylene Composites. Journal of Applied Polymer Science, 142(30). https://doi.org/10.1002/app.57211

Vancouver

Basiji F, Erchiqui F, Koubaa A, Ghasemi I, Baatti A. Impact of Fiber Morphology and Content on the Thermal Stability, and Mechanical Performance of Maple Wood Fiber‐Polypropylene Composites. Journal of Applied Polymer Science. 2025;142(30). doi:10.1002/app.57211

BibTeX
@article{Basiji2025,
  author = {Basiji, Farshid and Erchiqui, Fouad and Koubaa, Ahmed and Ghasemi, Ismaeil and Baatti, Abdessamad},
  title = {Impact of Fiber Morphology and Content on the Thermal Stability, and Mechanical Performance of Maple Wood Fiber‐Polypropylene Composites},
  journal = {Journal of Applied Polymer Science},
  year = {2025},
  volume = {142},
  number = {30},
  doi = {10.1002/app.57211}
}
Kostenlos starten →